PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SK64354
SK64354 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, housing_bore_diameter: 2.500 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-977-9951, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SK64354
NSN: 5330-00-977-9951
FSC: 5330
CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
housing_bore_diameter2.500 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.625 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-977-9951
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SK64354 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
•
HOUSING BORE DIAMETER: 2.500 INCHES NOMINAL IN
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.625 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEALING ELEMENT STYLE: ANGULAR
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
HOUSING BORE DIAMETER2.500 INCHES NOMINAL IN
SEAL WIDTH0.500 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.625 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
SEALING ELEMENT STYLEANGULAR
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
16281Interchangeable
interchangeable cross-reference
interchangeable
60568Interchangeable
interchangeable cross-reference
interchangeable
250W120M1Interchangeable
interchangeable cross-reference
interchangeable
S1325739SInterchangeable
interchangeable cross-reference
interchangeable
PA10275Interchangeable
interchangeable cross-reference
interchangeable
P4055Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SK64354?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SK64354?
SK64354 is a SEAL,PLAIN ENCASED.
What parts can replace SK64354?
There are 13 known substitutes for SK64354: 16281, 60568, 250W120M1 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SK64354?
SK64354 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-977-9951. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SK64354

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026