PartsTable
Technical Data Sheet
Download PDF

SK6367-2 — SLEEVE,SHAFT,PUMP

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

SK6367-2: SLEEVE,SHAFT,PUMP.

The SLEEVE,SHAFT,PUMP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, corner_shape: SQUARE LEFT FLANGE BODY CORNER, flange_width: 1.5600 INCHES NOMINAL IN, overall_length: 5.7500 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES OVERALL, keyway_dimension: 0.0250 INCHES NOMINAL INTERNAL KEYWAY WIDTH IN. This part is cataloged in the U.S.

Government catalog under NSN 4320-01-323-7125, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SK6367-2
NSN: 4320-01-323-7125
FSC: 4320 — Power and Hand Pumps
CAGE: 89256 — NAVAL SHIP ENGINEERING CENTER PHILADELPHIA DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 316 OVERALL
corner_shapeSQUARE LEFT FLANGE BODY CORNER
flange_width1.5600 INCHES NOMINAL IN
overall_length5.7500 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES OVERALL
keyway_dimension0.0250 INCHES NOMINAL INTERNAL KEYWAY WIDTH IN
special_featuresA 0.370 IN. DEEP BY 0.130 IN. W BY 0.740 IN. LG RADIUS CUT BEHIND KEYWAY IN
style_designatorSOLID, EXTERNAL FLANGE ONE END, INTERNAL FLANGE ONE END
body_inside_diameter1.2500 INCHES NOMINAL IN
body_outside_diameter1.5000 INCHES NOMINAL IN
flange_outside_diameter1.6200 INCHES NOMINAL IN
left_internal_flange_width0.6330 INCHES NOMINAL IN
NSN4320-01-323-7125
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available SLEEVE,SHAFT,PUMP TITLE COMPONENT PN SK6367-2 MFR SLEEVE,SHAFT,PUMP
KEY FEATURES
•
LEFT INTERNAL FLANGE WIDTH: 0.6330 INCHES NOMINAL IN
•
SURFACE FINISH: 125.0 MICROINCHES OVERALL
•
LEFT INTERNAL FLANGE HOLE DIAMETER: 1.0140 INCHES NOMINAL IN
•
CORNER SHAPE: CHAMFERED INSIDE LEFT CORNER
TECHNICAL CHARACTERISTICS
LEFT INTERNAL FLANGE WIDTH0.6330 INCHES NOMINAL IN
SURFACE FINISH125.0 MICROINCHES OVERALL
LEFT INTERNAL FLANGE HOLE DIAMETER1.0140 INCHES NOMINAL IN
CORNER SHAPECHAMFERED INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
FLANGE OUTSIDE DIAMETER1.6200 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
6367-2Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
014-09N-003C201Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
6367-2 PIECE 1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SK6367-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SK6367-2?
SK6367-2 is a SLEEVE,SHAFT,PUMP.
What parts can replace SK6367-2?
There are 3 known substitutes for SK6367-2: 6367-2, 014-09N-003C201, 6367-2 PIECE 1. Substitute compatibility should be verified for your specific system.
What is the NSN for SK6367-2?
SK6367-2 is cataloged in the U.S. Government catalog under NSN 4320-01-323-7125. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SK6367-2