PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SK205-6
SK205-6 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OR COPPER ALLOY RETAINER, alignment_type: RIGID, overall_height: 0.7400 INCHES MINIMUM AND 0.7650 INCHES MAXIMUM IN, surface_finish: GROUND, special_features: WASHERS OVERLAP, style_designator: CLUTCH RELEASE, THRUST. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-158-6192, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SK205-6
NSN: 3110-00-158-6192
FSC: 3110
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
materialSTEEL OR COPPER ALLOY RETAINER
alignment_typeRIGID
overall_height0.7400 INCHES MINIMUM AND 0.7650 INCHES MAXIMUM IN
surface_finishGROUND
special_featuresWASHERS OVERLAP
style_designatorCLUTCH RELEASE, THRUST
bore_smallest_diameter2.0625 INCHES MINIMUM AND 2.0635 INCHES MAXIMUM IN
overall_outside_diameter3.3181 INCHES MINIMUM AND 3.3381 INCHES MAXIMUM IN
thrust_directional_capability_designationSINGLE
NSN3110-00-158-6192
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SK205-6 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 3.3181 INCHES MINIMUM AND 3.3381 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
BORE SMALLEST DIAMETER: 2.0625 INCHES MINIMUM AND 2.0635 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
MATERIAL: STEEL BALL
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESWASHERS OVERLAP
OVERALL OUTSIDE DIAMETER3.3181 INCHES MINIMUM AND 3.3381 INCHES MAXIMUM IN
SURFACE FINISHGROUND
BORE SMALLEST DIAMETER2.0625 INCHES MINIMUM AND 2.0635 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
MATERIALSTEEL BALL
MATERIALSTEEL BAND
OVERALL HEIGHT0.7400 INCHES MINIMUM AND 0.7650 INCHES MAXIMUM IN
MATERIALSTEEL OR COPPER ALLOY RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
1988Interchangeable
interchangeable cross-reference
interchangeable
M970-7Interchangeable
interchangeable cross-reference
interchangeable
1761-07Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171Interchangeable
interchangeable cross-reference
interchangeable
CWC87503Interchangeable
interchangeable cross-reference
interchangeable
B14Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SK205-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SK205-6?
SK205-6 is a BEARING,BALL,THRUST.
What parts can replace SK205-6?
There are 19 known substitutes for SK205-6: 1988, M970-7, 1761-07 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SK205-6?
SK205-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-158-6192. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SK205-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026