SK1232 — CAPACITOR,FIXED,CERAMIC DIELECTR

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

SK1232: CAPACITOR,FIXED,CERAMIC DIELECTR.

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN, body_height: 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN, body_length: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN, terminal_length: 1.500 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-00-109-1992, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ SK1232

NSN: 5910-00-109-1992
FSC: 5910 — Capacitors
CAGE: 14158 — AVX FILTERS (USA)

SPECIFICATIONS

material	PLASTIC CASE
body_style	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
body_height	0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
body_length	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
terminal_length	1.500 INCHES MINIMUM IN
special_features	WEAPON SYSTEM ESSENTIAL
terminal_diameter	0.025 INCHES NOMINAL IN
reliability_indicator	NOT ESTABLISHED
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
NSN	5910-00-109-1992

COMPONENT DIAGRAM

KEY FEATURES

•

TERMINAL DIAMETER: 0.025 INCHES NOMINAL IN

•

BODY STYLE: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE

•

TOLERANCE RANGE PER SECTION: -10.00 TO 10.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 1.500 INCHES MINIMUM IN

•

BODY WIDTH: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN

•

BODY HEIGHT: 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

TERMINAL DIAMETER	0.025 INCHES NOMINAL IN
BODY STYLE	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
TOLERANCE RANGE PER SECTION	-10.00 TO 10.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	1.500 INCHES MINIMUM IN
BODY WIDTH	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
BODY HEIGHT	0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATION	FEAT
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	200.0 DC SINGLE SECTION

SUBSTITUTES & CROSS-REFERENCES 2

EL200RC394KReference document

Same NSN cross-reference

Reference document — Secondary reference

25672-2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy SK1232?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is SK1232?

SK1232 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).

What parts can replace SK1232?

There are 2 known substitutes for SK1232: EL200RC394K, 25672-2. Substitute compatibility should be verified for your specific system.

What is the NSN for SK1232?

SK1232 is cataloged in the U.S. Government catalog under NSN 5910-00-109-1992. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

SK1232 — CAPACITOR,FIXED,CERAMIC DIELECTR

Request a Quote — SK1232