PartsTable
Technical Data Sheet
Download PDF

SK110405 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SK110405: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include cut_type: RECTANGULAR OVERALL, joint_type: BUTT OVERALL, peripheral_diameter: 1.531 INCHES NOMINAL IN, center_hole_diameter: 1.000 INCHES NOMINAL IN, cross-sectional_height: 0.172 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-987-7336, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SK110405
NSN: 5330-00-987-7336
FSC: 5330 — Packing and Gasket Materials
CAGE: 93232 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DBA CURTISS WRIGHT ENGINEERED PUMP DIVISION USE CAGE CODE 0UBG9 FOR CATALOGING (USA)
SPECIFICATIONS
cut_typeRECTANGULAR OVERALL
joint_typeBUTT OVERALL
peripheral_diameter1.531 INCHES NOMINAL IN
center_hole_diameter1.000 INCHES NOMINAL IN
cross-sectional_height0.172 INCHES NOMINAL IN
NSN5330-00-987-7336
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SK110405 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.172 INCHES NOMINAL IN
•
CUT TYPE: RECTANGULAR OVERALL
•
PERIPHERAL DIAMETER: 1.531 INCHES NOMINAL IN
•
COLOR: WHITE
•
CENTER HOLE DIAMETER: 1.000 INCHES NOMINAL IN
•
JOINT TYPE: BUTT OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.172 INCHES NOMINAL IN
CUT TYPERECTANGULAR OVERALL
PERIPHERAL DIAMETER1.531 INCHES NOMINAL IN
COLORWHITE
CENTER HOLE DIAMETER1.000 INCHES NOMINAL IN
JOINT TYPEBUTT OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
17155PReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SK110405?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SK110405?
SK110405 is a PACKING,PREFORMED.
What parts can replace SK110405?
There is 1 known substitute for SK110405: 17155P. Substitute compatibility should be verified for your specific system.
What is the NSN for SK110405?
SK110405 is cataloged in the U.S. Government catalog under NSN 5330-00-987-7336. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SK110405

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.