PartsTable
Technical Data Sheet
Download PDF

SK-D-97050 PC 10 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

SK-D-97050 PC 10: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: HEXAGON, head_height: 0.468 INCHES NOMINAL IN, thread_length: 2.750 INCHES MINIMUM IN, fastener_length: 5.000 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-462-1188, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SK-D-97050 PC 10
NSN: 5305-01-462-1188
FSC: 5305 — Screws
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleHEXAGON
head_height0.468 INCHES NOMINAL IN
thread_length2.750 INCHES MINIMUM IN
fastener_length5.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_between_flats1.125 INCHES NOMINAL IN
nominal_thread_diameter0.750 INCHES IN
thread_quantity_per_inch10
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-462-1188
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SK-D-97050 PC 10 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.468 INCHES NOMINAL IN
•
FASTENER LENGTH: 5.000 INCHES NOMINAL IN
•
THREAD LENGTH: 2.750 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.750 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 1.125 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 10
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.468 INCHES NOMINAL IN
FASTENER LENGTH5.000 INCHES NOMINAL IN
THREAD LENGTH2.750 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.750 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS1.125 INCHES NOMINAL IN
THREAD QUANTITY PER INCH10
MATERIALSTEEL CORROSION RESISTING OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
92198A855Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SK-D-97050 PC 10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SK-D-97050 PC 10?
SK-D-97050 PC 10 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace SK-D-97050 PC 10?
There is 1 known substitute for SK-D-97050 PC 10: 92198A855. Substitute compatibility should be verified for your specific system.
What is the NSN for SK-D-97050 PC 10?
SK-D-97050 PC 10 is cataloged in the U.S. Government catalog under NSN 5305-01-462-1188. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SK-D-97050 PC 10