PartsTable
Technical Data Sheet
Download PDF

SK-2011-24 — NUT,SELF-LOCKING,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SK-2011-24: NUT,SELF-LOCKING,ROUND.

The NUT,SELF-LOCKING,ROUND is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: ROUND, nut_diameter: 6.000 INCHES NOMINAL IN, nut_thickness: 1.000 INCHES NOMINAL IN, thread_series: SQUARE, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-542-8600, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SK-2011-24
NSN: 5310-01-542-8600
FSC: 5310 — Nuts and Washers
CAGE: 18740 — YALE INDUSTRIAL PRODUCTS, INC. DIV DUFF NORTON COMPANY (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleROUND
nut_diameter6.000 INCHES NOMINAL IN
nut_thickness1.000 INCHES NOMINAL IN
thread_seriesSQUARE
thread_directionRIGHT-HAND
nominal_thread_size2.000 INCHES IN
drilled_hole_diameter0.812 INCHES NOMINAL IN
hole_type_and_quantity4 DRILLED
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
NSN5310-01-542-8600
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SK-2011-24 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: SQUARE
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 2.000 INCHES IN
•
NUT DIAMETER: 6.000 INCHES NOMINAL IN
•
NUT THICKNESS: 1.000 INCHES NOMINAL IN
•
DRILLED HOLE DIAMETER: 0.812 INCHES NOMINAL IN
•
NUT STYLE: ROUND
TECHNICAL CHARACTERISTICS
THREAD SERIESSQUARE
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE2.000 INCHES IN
NUT DIAMETER6.000 INCHES NOMINAL IN
NUT THICKNESS1.000 INCHES NOMINAL IN
DRILLED HOLE DIAMETER0.812 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
NUT STYLEROUND
MATERIALCOPPER ALLOY OVERALL
HOLE TYPE AND QUANTITY4 DRILLED
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
SM-A-948012-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SK-2011-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SK-2011-24?
SK-2011-24 is a NUT,SELF-LOCKING,ROUND.
What parts can replace SK-2011-24?
There is 1 known substitute for SK-2011-24: SM-A-948012-1. Substitute compatibility should be verified for your specific system.
What is the NSN for SK-2011-24?
SK-2011-24 is cataloged in the U.S. Government catalog under NSN 5310-01-542-8600. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SK-2011-24