PartsTable
Technical Data Sheet

SK-1 3/4 — BUSHING,TAPERED

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

SK-1 3/4: BUSHING,TAPERED.

The BUSHING,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include overall_length: 1.938 INCHES NOMINAL IN, inside_diameter: 1.750 INCHES NOMINAL IN, tapered_portion_length: 1.750 INCHES NOMINAL IN, large_end_outside_diameter: 2.812 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5365-01-109-5037, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SK-1 3/4
NSN: 5365-01-109-5037
NIINs: 011095037, 013258624
FSC: 5365 — Bushings, Rings, Shims, and Spacers
CAGE: 79425 — TB WOODS'S CORPORATION (USA)
SPECIFICATIONS
overall_length1.938 INCHES NOMINAL IN
inside_diameter1.750 INCHES NOMINAL IN
tapered_portion_length1.750 INCHES NOMINAL IN
large_end_outside_diameter2.812 INCHES NOMINAL IN
NSN5365-01-109-5037
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available BUSHING,TAPERED TITLE COMPONENT PN SK-1 3/4 MFR BUSHING,TAPERED
KEY FEATURES
•
TAPERED PORTION LENGTH: 1.380 INCHES NOMINAL IN
•
LARGE END OUTSIDE DIAMETER: 3.880 INCHES NOMINAL IN
•
INSIDE DIAMETER: 1.750 INCHES NOMINAL IN
•
MATERIAL: IRON
•
SPLIT WIDTH: 0.060 INCHES NOMINAL IN
•
TAPER INCLUDED ANGLE: 3 DEGREES 34 MINUTES 35.6 SECONDS
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
TAPERED PORTION LENGTH1.380 INCHES NOMINAL IN
LARGE END OUTSIDE DIAMETER3.880 INCHES NOMINAL IN
OVERALL LENGTH1.880 INCHES NOMINAL IN
INSIDE DIAMETER1.750 INCHES NOMINAL IN
SPECIAL FEATURESTHREADED HOLE EQUALLY SPACED 3; PLAIN HOLE EQUALLY SPACED 3; SLOT LOCATED OPPOSITE SPLIT SIDE
MATERIALIRON
SPLIT WIDTH0.060 INCHES NOMINAL IN
TAPER INCLUDED ANGLE3 DEGREES 34 MINUTES 35.6 SECONDS
SUBSTITUTES & CROSS-REFERENCES 2
SKI3/4Reference document
Same NSN cross-reference
Reference document — Secondary reference
745756-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SK-1 3/4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SK-1 3/4?
SK-1 3/4 is a BUSHING,TAPERED.
What parts can replace SK-1 3/4?
There are 2 known substitutes for SK-1 3/4: SKI3/4, 745756-1. Substitute compatibility should be verified for your specific system.
What is the NSN for SK-1 3/4?
SK-1 3/4 is cataloged in the U.S. Government catalog under NSN 5365-01-109-5037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SK-1 3/4