PartsTable
Technical Data Sheet
Download PDF

SJ74979 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SJ74979: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 3.7512 INCHES MINIMUM AND 3.7521 INCHES MAXIMUM IN, overall_width: 1.4950 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN, alignment_type: RIGID, style_designator: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND, lubrication_material: GREASE, overall_outside_diameter: 4.4992 INCHES MINIMUM AND 4.5000 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-140-7960, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SJ74979
NSN: 3110-00-140-7960
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 51588 — RBC BEARINGS INCORPORATED DIV WEST TRENTON DIVISION (USA)
SPECIFICATIONS
bore_diameter3.7512 INCHES MINIMUM AND 3.7521 INCHES MAXIMUM IN
overall_width1.4950 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
alignment_typeRIGID
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
lubrication_materialGREASE
overall_outside_diameter4.4992 INCHES MINIMUM AND 4.5000 INCHES MAXIMUM IN
lubrication_material_document_and_classificationMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-140-7960
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SJ74979 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
OVERALL OUTSIDE DIAMETER: 4.4992 INCHES MINIMUM AND 4.5000 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 3.7512 INCHES MINIMUM AND 3.7521 INCHES MAXIMUM IN
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
OVERALL WIDTH1.4950 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER4.4992 INCHES MINIMUM AND 4.5000 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
BORE DIAMETER3.7512 INCHES MINIMUM AND 3.7521 INCHES MAXIMUM IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
K618734-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SJ74979?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SJ74979?
SJ74979 is a BEARING,ROLLER,NEEDLE.
What parts can replace SJ74979?
There is 1 known substitute for SJ74979: K618734-1. Substitute compatibility should be verified for your specific system.
What is the NSN for SJ74979?
SJ74979 is cataloged in the U.S. Government catalog under NSN 3110-00-140-7960. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SJ74979