PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SJ7134
SJ7134 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OR COPPER ALLOY RETAINER, bore_diameter: 0.6250 INCHES NOMINAL IN, overall_width: 1.0000 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE AND OIL GROOVE IN OUTER RING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-3235, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SJ7134
NSN: 3110-00-227-3235
FSC: 3110
CAGE: 51588 — RBC BEARINGS INCORPORATED DIV WEST TRENTON DIVISION (USA)
SPECIFICATIONS
materialSTEEL OR COPPER ALLOY RETAINER
bore_diameter0.6250 INCHES NOMINAL IN
overall_width1.0000 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOIL HOLE AND OIL GROOVE IN OUTER RING
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
overall_outside_diameter1.1250 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OR SAE J404 ASSN STD ALL MATERIAL RESPONSES ROLLER
NSN3110-00-227-3235
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SJ7134 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 0.6250 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP E4340H OR STEEL COMP 4720 OR STEEL COMP 8620 OR STEEL COMP 8720 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP E51100 OR STEEL COMP E50100 OR STEEL COMP E52100 OUTER RING
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OR SAE J404 ASSN STD ALL MATERIAL RESPONSES ROLLER
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.0000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER0.6250 INCHES NOMINAL IN
MATERIALSTEEL COMP E4340H OR STEEL COMP 4720 OR STEEL COMP 8620 OR STEEL COMP 8720 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP E51100 OR STEEL COMP E50100 OR STEEL COMP E52100 OUTER RING
MATERIALSTEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 ROLLER
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OR SAE J404 ASSN STD ALL MATERIAL RESPONSES ROLLER
MATERIALSTEEL OR COPPER ALLOY RETAINER
SURFACE FINISHGROUND
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
SM10-16BInterchangeable
interchangeable cross-reference
interchangeable
MR10Interchangeable
interchangeable cross-reference
interchangeable
PC361200000-5Interchangeable
interchangeable cross-reference
interchangeable
M39010-02-10-5PCInterchangeable
interchangeable cross-reference
interchangeable
MS90537-25Interchangeable
interchangeable cross-reference
interchangeable
240-2715-252Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SJ7134?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SJ7134?
SJ7134 is a BEARING,ROLLER,NEEDLE.
What parts can replace SJ7134?
There are 21 known substitutes for SJ7134: SM10-16B, MR10, PC361200000-5 and 18 more. Substitute compatibility should be verified for your specific system.
Is SJ7134 still available?
SJ7134 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SJ7134

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026