PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SJ12282ZE7
SJ12282ZE7 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.1875 INCHES NOMINAL IN, overall_width: 0.1094 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-044-5228, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SJ12282ZE7
NSN: 3110-00-044-5228
FSC: 3110
CAGE: 07102 — REED INSTRUMENT BEARING CO (USA)
SPECIFICATIONS
materialSTEEL COMP 440C OVERALL
bore_shapeSTRAIGHT
bore_diameter0.1875 INCHES NOMINAL IN
overall_width0.1094 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter0.4375 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.7
NSN3110-00-044-5228
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SJ12282ZE7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
•
SHIELD QUANTITY: 2
•
BORE SHAPE: STRAIGHT
•
LUBRICATION MATERIAL: GREASE
•
MATERIAL: STEEL COMP 440C OVERALL
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
STANDARD TOLERANCE DESIGNATIONABEC NO.7
SHIELD QUANTITY2
BORE SHAPESTRAIGHT
LUBRICATION MATERIALGREASE
MATERIALSTEEL COMP 440C OVERALL
LOAD DIRECTIONRADIAL
OVERALL WIDTH0.1094 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.4375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
114489Interchangeable
interchangeable cross-reference
interchangeable
86221Interchangeable
interchangeable cross-reference
interchangeable
FF-S-210Interchangeable
interchangeable cross-reference
interchangeable
UCS25-500Interchangeable
interchangeable cross-reference
interchangeable
265-1Interchangeable
interchangeable cross-reference
interchangeable
UCS500Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SJ12282ZE7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SJ12282ZE7?
SJ12282ZE7 is a BEARING,BALL,ANNULAR.
What parts can replace SJ12282ZE7?
There are 21 known substitutes for SJ12282ZE7: 114489, 86221, FF-S-210 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SJ12282ZE7?
SJ12282ZE7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-044-5228. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SJ12282ZE7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026