PartsTable
Technical Data Sheet
Download PDF

SIZE96A — CAP-PLUG,PROTECTIVE,DUST AND MOI

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SIZE96A: CAP-PLUG,PROTECTIVE,DUST AND MOI.

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: PLASTIC, special_features: COUNTERSUNK OPENING OUTSIDE DIAMETER 3.492 INCHES NOMINAL;SHOULDER OUTSIDE DIAMETER 3.690 INCHES NOMINAL; IN, length_under_shoulder: 1.125 INCHES NOMINAL IN, end_item_identification: 6625-01-484-2782, THIRD ECHELON TEST SYSTEM, open_end_inside_diameter: 3.200 INCHES NOMINAL IN, closed_end_overall_diameter: 3.562 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-290-7226, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SIZE96A
NSN: 5340-00-290-7226
FSC: 5340 — Hardware, Commercial
CAGE: 95760 — PROTECTIVE CLOSURES CO INC (USA)
SPECIFICATIONS
materialPLASTIC
special_featuresCOUNTERSUNK OPENING OUTSIDE DIAMETER 3.492 INCHES NOMINAL;SHOULDER OUTSIDE DIAMETER 3.690 INCHES NOMINAL; IN
length_under_shoulder1.125 INCHES NOMINAL IN
end_item_identification6625-01-484-2782, THIRD ECHELON TEST SYSTEM
open_end_inside_diameter3.200 INCHES NOMINAL IN
closed_end_overall_diameter3.562 INCHES NOMINAL IN
specification/standard_data80205-MIL-C-5501G 6-30-1989 OBSOLETE AND REPLACED BY NAS 847 2-1-1998 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD G
part_name_assigned_by_controlling_agencyCAP PLUG T-SERIES LPE
NSN5340-00-290-7226
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SIZE96A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 3.562 INCHES NOMINAL IN
•
LENGTH UNDER SHOULDER: 1.125 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 80205-MIL-C-5501G 6-30-1989 OBSOLETE AND REPLACED BY NAS 847 2-1-1998 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD G
•
OPEN END INSIDE DIAMETER: 3.200 INCHES NOMINAL IN
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS
CLOSED END OVERALL DIAMETER3.562 INCHES NOMINAL IN
LENGTH UNDER SHOULDER1.125 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA80205-MIL-C-5501G 6-30-1989 OBSOLETE AND REPLACED BY NAS 847 2-1-1998 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD G
SPECIAL FEATURESCOUNTERSUNK OPENING OUTSIDE DIAMETER 3.492 INCHES NOMINAL;SHOULDER OUTSIDE DIAMETER 3.690 INCHES NOMINAL; IN
OPEN END INSIDE DIAMETER3.200 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYCAP PLUG T-SERIES LPE
END ITEM IDENTIFICATION6625-01-484-2782, THIRD ECHELON TEST SYSTEM
MATERIALPLASTIC
SUBSTITUTES & CROSS-REFERENCES 3
11-227-01Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
MILC52078Reference document
Same NSN cross-reference
Reference document — Identification reference
96-AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SIZE96A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SIZE96A?
SIZE96A is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace SIZE96A?
There are 3 known substitutes for SIZE96A: 11-227-01, MILC52078, 96-A. Substitute compatibility should be verified for your specific system.
What is the NSN for SIZE96A?
SIZE96A is cataloged in the U.S. Government catalog under NSN 5340-00-290-7226. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SIZE96A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.