PartsTable
Technical Data Sheet

SHDX-2/4 — SCREW,SHOULDER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

SHDX-2/4: SCREW,SHOULDER.

The SCREW,SHOULDER is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, head_style: FLAT CHAMFER, head_height: 0.125 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.250 INCHES NOMINAL IN, thread_length: 0.156 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-494-7769, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SHDX-2/4
NSN: 5305-01-494-7769
FSC: 5305 — Screws
CAGE: 2K300 — SMALL PARTS INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
head_styleFLAT CHAMFER
head_height0.125 INCHES NOMINAL IN
thread_class3A A
head_diameter0.250 INCHES NOMINAL IN
thread_length0.156 INCHES NOMINAL IN
fastener_length0.406 INCHES NOMINAL IN
shoulder_length0.250 INCHES NOMINAL ALL SHOULDERS IN
thread_directionRIGHT-HAND
shoulder_diameter0.125 INCHES NOMINAL ALL SHOULDERS IN
width_across_flats0.078 INCHES NOMINAL IN
internal_drive_styleHEXAGON
NSN5305-01-494-7769
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SHDX-2/4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.078 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.125 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.406 INCHES NOMINAL IN
•
SHOULDER LENGTH: 0.250 INCHES NOMINAL ALL SHOULDERS IN
•
SHOULDER DIAMETER: 0.125 INCHES NOMINAL ALL SHOULDERS IN
•
THREAD LENGTH: 0.156 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.078 INCHES NOMINAL IN
HEAD HEIGHT0.125 INCHES NOMINAL IN
FASTENER LENGTH0.406 INCHES NOMINAL IN
SHOULDER LENGTH0.250 INCHES NOMINAL ALL SHOULDERS IN
SHOULDER DIAMETER0.125 INCHES NOMINAL ALL SHOULDERS IN
THREAD LENGTH0.156 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLEHEXAGON
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SHDX-2/4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SHDX-2/4?
SHDX-2/4 is a SCREW,SHOULDER.
What is the NSN for SHDX-2/4?
SHDX-2/4 is cataloged in the U.S. Government catalog under NSN 5305-01-494-7769. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SHDX-2/4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.