PartsTable
Technical Data Sheet
Download PDF

SH14-1 — SH14-1

✓ Government record, cited
CoreParts · NUT WASHER
PRODUCT OVERVIEW

SH14-1: SH14-1.

The SH14-1 is a CoreParts industrial component. Key specifications include end_item_identification: 4930013927579, part_name_assigned_by_controlling_agency: HOSE, 20.00L. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-940-8667, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SH14-1
NSN: 5315-00-940-8667
NIINs: 009408667, 010976736, 015217097
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
end_item_identification4930013927579
part_name_assigned_by_controlling_agencyHOSE, 20.00L
NSN5315-00-940-8667
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SH14-1 · CoreParts ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EXPANDED DIAMETER: 0.041 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN
•
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: COILED
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
DIAMETER: 0.039 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
EXPANDED DIAMETER0.041 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORCOILED
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
DIAMETER0.039 INCHES NOMINAL IN
OVERALL LENGTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 420 OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
5315009408667Reference document
Same NSN cross-reference
Reference document — Informative reference only
039-0375MPDSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS51923-179Reference document
Same NSN cross-reference
Reference document — Secondary reference
31167-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SH14-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SH14-1?
SH14-1 is a SH14-1 manufactured by CoreParts.
What parts can replace SH14-1?
There are 4 known substitutes for SH14-1: 5315009408667, 039-0375MPD, MS51923-179 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SH14-1?
SH14-1 is cataloged in the U.S. Government catalog under NSN 5315-00-940-8667. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SH14-1