PartsTable
Technical Data Sheet
Download PDF

SH115 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

SH115: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include end_item_identification: ACFT MODEL F111, general_characteristics_item_description: PLASTIC,P6073-1,FSCM 81755. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-079-8133, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SH115
NSN: 3120-00-079-8133
NIINs: 000798133, 004065937
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 80755 — RANDALL BEARING INC (USA)
SPECIFICATIONS
end_item_identificationACFT MODEL F111
general_characteristics_item_descriptionPLASTIC,P6073-1,FSCM 81755
NSN3120-00-079-8133
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: SH115 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BODY OUTSIDE DIAMETER: 0.8770 INCHES MINIMUM AND 0.8780 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE CA932 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
BODY INSIDE DIAMETER: 0.6240 INCHES MINIMUM AND 0.6260 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY 932 OVERALL
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
BODY OUTSIDE DIAMETER0.8770 INCHES MINIMUM AND 0.8780 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
MATERIAL DOCUMENT AND CLASSIFICATIONSAE CA932 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH1.2450 INCHES MINIMUM AND 1.2550 INCHES MAXIMUM IN
BODY INSIDE DIAMETER0.6240 INCHES MINIMUM AND 0.6260 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY 932 OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
CB1014-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
64GPReference document
Same NSN cross-reference
Reference document — Secondary reference
H060Reference document
Same NSN cross-reference
Reference document — Secondary reference
D168Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SH115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SH115?
SH115 is a RESISTOR,VARIABLE,NONWIRE WOUND,.
What parts can replace SH115?
There are 4 known substitutes for SH115: CB1014-10, 64GP, H060 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SH115?
SH115 is cataloged in the U.S. Government catalog under NSN 3120-00-079-8133. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SH115

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.