PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SH10-1-4-XL10
SH10-1-4-XL10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CASTER,SWIVEL is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY FRAME, style_designator: SWIVEL OFFSET, features_provided: SWIVEL LOCK AND BRAKE LOCK, safe_operating_load_rating: 4600.0 POUNDS MAXIMUM LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-277-8975, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SH10-1-4-XL10
NSN: 5340-01-277-8975
FSC: 5340
CAGE: 83445 — AEROL LLC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY FRAME
wheel_quantity1
style_designatorSWIVEL OFFSET
features_providedSWIVEL LOCK AND BRAKE LOCK
safe_operating_load_rating4600.0 POUNDS MAXIMUM LBS
NSN5340-01-277-8975
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SH10-1-4-XL10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATURES PROVIDED: BRAKE LOCK AND SWIVEL LOCK
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 7.000 INCHES NOMINAL IN
•
CASTER PLATE LENGTH: 8.380 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SWIVEL OFFSET
•
MATERIAL: ALUMINUM ALLOY BODY
•
CASTER PLATE WIDTH: 8.380 INCHES NOMINAL IN
•
WHEEL QUANTITY: 1
•
CASTER PLATE MOUNTING HOLE DIAMETER: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FEATURES PROVIDEDBRAKE LOCK AND SWIVEL LOCK
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH7.000 INCHES NOMINAL IN
CASTER PLATE LENGTH8.380 INCHES NOMINAL IN
STYLE DESIGNATORSWIVEL OFFSET
MATERIALALUMINUM ALLOY BODY
CASTER PLATE WIDTH8.380 INCHES NOMINAL IN
WHEEL QUANTITY1
CASTER PLATE MOUNTING HOLE DIAMETER0.500 INCHES NOMINAL IN
WHEEL TYPEBUILT UP
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH7.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
32904-2Upgraded Successor
successor cross-reference
successor
32904Upgraded Successor
successor cross-reference
successor
32904 / REV BUpgraded Successor
successor cross-reference
successor
SPD09021169Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SH10-1-4-XL10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SH10-1-4-XL10?
SH10-1-4-XL10 is a CASTER,SWIVEL.
What parts can replace SH10-1-4-XL10?
There are 4 known substitutes for SH10-1-4-XL10: 32904-2, 32904, 32904 / REV B and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SH10-1-4-XL10?
SH10-1-4-XL10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-277-8975. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SH10-1-4-XL10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026