PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SG811-CF-MMC-010 PG 7-16 ITEM10
SG811-CF-MMC-010 PG 7-16 ITEM10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include knuckle_type: FRICTION, pin_tip_style: FLAT BUTTON, overall_length: 42.620 INCHES NOMINAL IN, knuckle_quantity: 22, performance_type: NOT RATED, style_designator: BUTT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-524-4102, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SG811-CF-MMC-010 PG 7-16 ITEM10
NSN: 5340-01-524-4102
FSC: 5340
CAGE: 60848 — ALLIED SYSTEMS COMPANY DBA ALLIED SYSTEMS CO (USA)
SPECIFICATIONS
knuckle_typeFRICTION
pin_tip_styleFLAT BUTTON
overall_length42.620 INCHES NOMINAL IN
knuckle_quantity22
performance_typeNOT RATED
style_designatorBUTT
hinge_mounting_typeFULL SURFACE
mounting_hole_diameter0.300 INCHES NOMINAL IN
mounting_hole_quantity15
end_item_identificationCRANE
NSN5340-01-524-4102
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SG811-CF-MMC-010 PG 7-16 ITEM10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KNUCKLE QUANTITY: 22
•
MOUNTING HOLE QUANTITY: 15
•
MOUNTING HOLE DIAMETER: 0.300 INCHES NOMINAL IN
•
HINGE MOUNTING TYPE: FULL SURFACE
•
PIN TIP STYLE: FLAT BUTTON
•
PERFORMANCE TYPE: NOT RATED
•
KNUCKLE TYPE: FRICTION
TECHNICAL CHARACTERISTICS (FLIS)
KNUCKLE QUANTITY22
MOUNTING HOLE QUANTITY15
MOUNTING HOLE DIAMETER0.300 INCHES NOMINAL IN
HINGE MOUNTING TYPEFULL SURFACE
PIN TIP STYLEFLAT BUTTON
PERFORMANCE TYPENOT RATED
END ITEM IDENTIFICATIONCRANE
KNUCKLE TYPEFRICTION
STYLE DESIGNATORBUTT
OVERALL LENGTH42.620 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
99S12Interchangeable
interchangeable cross-reference
interchangeable
48241Interchangeable
interchangeable cross-reference
interchangeable
48241REVAInterchangeable
interchangeable cross-reference
interchangeable
20964Interchangeable
interchangeable cross-reference
interchangeable
4201636-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SG811-CF-MMC-010 PG 7-16 ITEM10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SG811-CF-MMC-010 PG 7-16 ITEM10?
SG811-CF-MMC-010 PG 7-16 ITEM10 is a HINGE,BUTT.
What parts can replace SG811-CF-MMC-010 PG 7-16 ITEM10?
There are 5 known substitutes for SG811-CF-MMC-010 PG 7-16 ITEM10: 99S12, 48241, 48241REVA and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SG811-CF-MMC-010 PG 7-16 ITEM10?
SG811-CF-MMC-010 PG 7-16 ITEM10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-524-4102. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SG811-CF-MMC-010 PG 7-16 ITEM10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026