PartsTable
Technical Data Sheet
Download PDF

SG3746PC6 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SG3746PC6: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_length: 0.375 INCHES NOMINAL IN, thread_class: 3B, thread_length: 0.375 INCHES NOMINAL IN, overall_length: 0.875 INCHES NOMINAL IN, shank_diameter: 0.275 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-291-8189, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SG3746PC6
NSN: 5315-00-291-8189
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 16712 — SIEMENS ENERGY, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_length0.375 INCHES NOMINAL IN
thread_class3B
thread_length0.375 INCHES NOMINAL IN
overall_length0.875 INCHES NOMINAL IN
shank_diameter0.275 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
surface_finish125.000 MICROINCHES OVERALL
first_end_styleCHAMFERED
special_featuresSHOULDER INTERNALLY THREADED
style_designatorSHOULDER
thread_directionRIGHT-HAND
shoulder_diameter0.436 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
NSN5315-00-291-8189
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SG3746PC6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.275 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
SURFACE FINISH: 125.000 MICROINCHES OVERALL
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
FIRST END LOCATION: BOTH ENDS
•
THREAD LENGTH: 0.375 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
SHANK LENGTH: 0.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDER
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.275 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
SURFACE FINISH125.000 MICROINCHES OVERALL
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
FIRST END LOCATIONBOTH ENDS
THREAD LENGTH0.375 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SHANK LENGTH0.375 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-16782 AMEND 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.875 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 6
SG3241PC6Reference document
Same NSN cross-reference
Reference document — Secondary reference
S836AEX8-9219Reference document
Same NSN cross-reference
Reference document — Secondary reference
SG3376PC6Reference document
Same NSN cross-reference
Reference document — Secondary reference
SG3945PC6Reference document
Same NSN cross-reference
Reference document — Secondary reference
576-2100-1506510REVALINE3Reference document
Same NSN cross-reference
Reference document — Secondary reference
SG3744PC6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SG3746PC6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SG3746PC6?
SG3746PC6 is a PIN,SHOULDER,HEADLESS.
What parts can replace SG3746PC6?
There are 6 known substitutes for SG3746PC6: SG3241PC6, S836AEX8-9219, SG3376PC6 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SG3746PC6?
SG3746PC6 is cataloged in the U.S. Government catalog under NSN 5315-00-291-8189. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SG3746PC6