PartsTable
Technical Data Sheet
Download PDF

SG3537PC19 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SG3537PC19: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1015 OVERALL, first_end_style: CHAMFERED, pin_overall_length: 2.250 INCHES NOMINAL IN, pin_overall_diameter: 0.5610 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES NOMINAL, first_end_taper_length: 0.031 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-514-0080, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SG3537PC19
NSN: 5315-00-514-0080
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 59180 — CIRCOR PUMPS NORTH AMERICA LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 1015 OVERALL
first_end_styleCHAMFERED
pin_overall_length2.250 INCHES NOMINAL IN
pin_overall_diameter0.5610 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
material_document_and_classificationASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-514-0080
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SG3537PC19 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.5610 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 2.250 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL COMP 1015 OVERALL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.5610 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
PIN OVERALL LENGTH2.250 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL COMP 1015 OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
SG3539PC11Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SG3537PC19?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SG3537PC19?
SG3537PC19 is a PIN,STRAIGHT,HEADLESS.
What parts can replace SG3537PC19?
There is 1 known substitute for SG3537PC19: SG3539PC11. Substitute compatibility should be verified for your specific system.
What is the NSN for SG3537PC19?
SG3537PC19 is cataloged in the U.S. Government catalog under NSN 5315-00-514-0080. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SG3537PC19