PartsTable
Technical Data Sheet
Download PDF

SG2735REVAPC29-30 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SG2735REVAPC29-30: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1018 OVERALL, nut_style: ROUND, nut_diameter: 1.875 INCHES NOMINAL IN, nut_thickness: 0.438 INCHES NOMINAL IN, thread_series: UNS, special_features: TAPPED HOLE LOCATED AT 90.0 DEG BETWEEN DRIVE POINT HOLES. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-297-8968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SG2735REVAPC29-30
NSN: 5310-00-297-8968
FSC: 5310 — Nuts and Washers
CAGE: 59180 — CIRCOR PUMPS NORTH AMERICA LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 1018 OVERALL
nut_styleROUND
nut_diameter1.875 INCHES NOMINAL IN
nut_thickness0.438 INCHES NOMINAL IN
thread_seriesUNS
special_featuresTAPPED HOLE LOCATED AT 90.0 DEG BETWEEN DRIVE POINT HOLES
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL NUT
nominal_thread_size0.688 INCHES IN
drive_point_diameter0.250 INCHES NOMINAL IN
drive_point_quantity2
thread_pitch_diameters+0.6438 TO 0.6484 INCHES IN
NSN5310-00-297-8968
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SG2735REVAPC29-30 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNS
•
THREAD PITCH DIAMETERS: +0.6438 TO 0.6484 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.688 INCHES IN
•
NUT DIAMETER: 1.875 INCHES NOMINAL IN
•
NUT THICKNESS: 0.438 INCHES NOMINAL IN
•
DRIVE POINT DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNS
THREAD PITCH DIAMETERS+0.6438 TO 0.6484 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.688 INCHES IN
NUT DIAMETER1.875 INCHES NOMINAL IN
NUT THICKNESS0.438 INCHES NOMINAL IN
DRIVE POINT DIAMETER0.250 INCHES NOMINAL IN
SPECIAL FEATURESTAPPED HOLE LOCATED AT 90.0 DEG BETWEEN DRIVE POINT HOLES
COUNTERSINK ANGLE90.0 DEGREES NOMINAL NUT
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 5
4501-3138574REVAPC29-30Reference document
Same NSN cross-reference
Reference document — Secondary reference
S813BReference document
Same NSN cross-reference
Reference document — Secondary reference
401-4111-1449506ITEM11Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
575-4501-1444244PC29-30Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SG3026PC29-30Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SG2735REVAPC29-30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SG2735REVAPC29-30?
SG2735REVAPC29-30 is a NUT,PLAIN,ROUND.
What parts can replace SG2735REVAPC29-30?
There are 5 known substitutes for SG2735REVAPC29-30: 4501-3138574REVAPC29-30, S813B, 401-4111-1449506ITEM11 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SG2735REVAPC29-30?
SG2735REVAPC29-30 is cataloged in the U.S. Government catalog under NSN 5310-00-297-8968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SG2735REVAPC29-30