PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SG2501PC64
SG2501PC64 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 45.00 MILLIMETERS NOMINAL MM, overall_width: 50.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND, style_designator: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-2071, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SG2501PC64
NSN: 3110-00-157-2071
FSC: 3110
CAGE: 59180 — CIRCOR PUMPS NORTH AMERICA LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter45.00 MILLIMETERS NOMINAL MM
overall_width50.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
overall_outside_diameter100.00 MILLIMETERS NOMINAL MM
bearing_preload_designationLIGHT
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.3
NSN3110-00-157-2071
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SG2501PC64 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
•
LOAD DIRECTION: ANGULAR
•
BORE DIAMETER: 45.00 MILLIMETERS NOMINAL MM
•
BEARING PRELOAD DESIGNATION: LIGHT
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH50.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONABEC NO.3
LOAD DIRECTIONANGULAR
BORE DIAMETER45.00 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONABEC NO.3
BEARING PRELOAD DESIGNATIONLIGHT
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
OVERALL OUTSIDE DIAMETER100.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
H20309Interchangeable
interchangeable cross-reference
interchangeable
SG2570PC64Interchangeable
Same NIIN cross-reference
interchangeable
SG2572PC64Interchangeable
Same NIIN cross-reference
interchangeable
7309DFInterchangeable
Same NIIN cross-reference
interchangeable
H20309DFL3Interchangeable
Same NIIN cross-reference
interchangeable
H20309DFLIAInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SG2501PC64?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SG2501PC64?
SG2501PC64 is a BEARING,BALL,DUPLEX.
What parts can replace SG2501PC64?
There are 7 known substitutes for SG2501PC64: H20309, SG2570PC64, SG2572PC64 and 4 more. Substitute compatibility should be verified for your specific system.
Is SG2501PC64 still available?
SG2501PC64 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SG2501PC64

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026