PartsTable
Technical Data Sheet
Download PDF

SFR6SSWX26K4CG2 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SFR6SSWX26K4CG2: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OUTER RING, bore_shape: STRAIGHT, flange_width: 0.0620 INCHES NOMINAL IN, bore_diameter: 0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, overall_width: 0.2800 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM IN, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-530-9100, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SFR6SSWX26K4CG2
NSN: 3110-01-530-9100
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 40920 — MPB CORP DIV TIMKEN SUPER PRECISION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OUTER RING
bore_shapeSTRAIGHT
flange_width0.0620 INCHES NOMINAL IN
bore_diameter0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
overall_width0.2800 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_featuresTHE FLANGE HAS ONE FLAT SIDE 0.877 IN. FROM OUTER RING OD OPPOSITE FLAT IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
end_item_identificationF-15 EAGLE E FWD FUSELAG
flange_outside_diameter0.9690 INCHES NOMINAL IN
NSN3110-01-530-9100
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SFR6SSWX26K4CG2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
FLANGE OUTSIDE DIAMETER: 0.9690 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
FLANGE OUTSIDE DIAMETER0.9690 INCHES NOMINAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.2800 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURESTHE FLANGE HAS ONE FLAT SIDE 0.877 IN. FROM OUTER RING OD OPPOSITE FLAT IN
FLANGE WIDTH0.0620 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SFR6SSWX26K4CG2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SFR6SSWX26K4CG2?
SFR6SSWX26K4CG2 is a BEARING,BALL,ANNULAR.
What is the NSN for SFR6SSWX26K4CG2?
SFR6SSWX26K4CG2 is cataloged in the U.S. Government catalog under NSN 3110-01-530-9100. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SFR6SSWX26K4CG2