PartsTable
Technical Data Sheet
Download PDF

SFR4FF3CG-68ABEC7 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SFR4FF3CG-68ABEC7: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include bore_shape: STRAIGHT, flange_width: 0.0420 INCHES NOMINAL IN, bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.1960 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-163-6533, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SFR4FF3CG-68ABEC7
NSN: 3110-01-163-6533
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
bore_shapeSTRAIGHT
flange_width0.0420 INCHES NOMINAL IN
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.1960 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0004 INCHES MAXIMUM RADIAL IN
calibration_designatorC
end_item_identificationRAPIER,VEHICLE MOUNTED
flange_outside_diameter0.6900 INCHES NOMINAL IN
outer_ring_outside_diameter0.6250 INCHES NOMINAL IN
NSN3110-01-163-6533
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SFR4FF3CG-68ABEC7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: STAMPED
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0004 INCHES MAXIMUM RADIAL IN
•
FLANGE OUTSIDE DIAMETER: 0.6900 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
SEAL QUANTITY: 2
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODSTAMPED
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0004 INCHES MAXIMUM RADIAL IN
FLANGE OUTSIDE DIAMETER0.6900 INCHES NOMINAL IN
SURFACE FINISHGROUND
OVERALL WIDTH0.1960 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SEAL QUANTITY2
FLANGE WIDTH0.0420 INCHES NOMINAL IN
OUTER RING OUTSIDE DIAMETER0.6250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy SFR4FF3CG-68ABEC7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SFR4FF3CG-68ABEC7?
SFR4FF3CG-68ABEC7 is a BEARING,BALL,ANNULAR.
What is the NSN for SFR4FF3CG-68ABEC7?
SFR4FF3CG-68ABEC7 is cataloged in the U.S. Government catalog under NSN 3110-01-163-6533. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SFR4FF3CG-68ABEC7