PartsTable
Technical Data Sheet
Download PDF

SFR2SS3G37 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SFR2SS3G37: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C BALL, bore_shape: STRAIGHT, flange_width: 0.0300 INCHES NOMINAL IN, bore_diameter: 0.1250 INCHES NOMINAL IN, overall_width: 0.1562 INCHES NOMINAL IN, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-213-9428, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SFR2SS3G37
NSN: 3110-01-213-9428
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 440C BALL
bore_shapeSTRAIGHT
flange_width0.0300 INCHES NOMINAL IN
bore_diameter0.1250 INCHES NOMINAL IN
overall_width0.1562 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
flange_outside_diameter0.4400 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
NSN3110-01-213-9428
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SFR2SS3G37 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
FLANGE OUTSIDE DIAMETER: 0.4400 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
INTERNAL FIT-UP DESIGNATIONSTANDARD
FLANGE OUTSIDE DIAMETER0.4400 INCHES NOMINAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.1562 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
SFR2SS3 MIL-G-25013Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SFR2PPK25 MIL-G-25013Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy SFR2SS3G37?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SFR2SS3G37?
SFR2SS3G37 is a BEARING,BALL,ANNULAR.
What parts can replace SFR2SS3G37?
There are 2 known substitutes for SFR2SS3G37: SFR2SS3 MIL-G-25013, SFR2PPK25 MIL-G-25013. Substitute compatibility should be verified for your specific system.
What is the NSN for SFR2SS3G37?
SFR2SS3G37 is cataloged in the U.S. Government catalog under NSN 3110-01-213-9428. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SFR2SS3G37