SFR23PPK18-168 — BEARING,BALL,ANNULAR

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

SFR23PPK18-168: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C OVERALL, bore_shape: STRAIGHT, flange_width: 0.0300 INCHES NOMINAL IN, bore_diameter: 0.1250 INCHES NOMINAL IN, overall_width: 0.1562 INCHES NOMINAL IN, alignment_type: RIGID. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-191-3227, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

SFR23PPK18-168

NSN: 3110-01-191-3227
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)

SPECIFICATIONS

material	STEEL COMP 440C OVERALL
bore_shape	STRAIGHT
flange_width	0.0300 INCHES NOMINAL IN
bore_diameter	0.1250 INCHES NOMINAL IN
overall_width	0.1562 INCHES NOMINAL IN
alignment_type	RIGID
load_direction	RADIAL
surface_finish	GROUND
shield_quantity	2
style_designator	NON-LOADING GROOVE, NON-SEPARABLE
internal_clearance	0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
lubrication_material	GREASE
NSN	3110-01-191-3227

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: PRESSED

•

LUBRICATION MATERIAL: GREASE

•

INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN

•

INTERNAL FIT-UP DESIGNATION: LOOSE

•

FLANGE OUTSIDE DIAMETER: 0.4400 INCHES NOMINAL IN

•

SURFACE FINISH: GROUND

•

SHIELD QUANTITY: 2

•

STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	PRESSED
LUBRICATION MATERIAL	GREASE
INTERNAL CLEARANCE	0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
INTERNAL FIT-UP DESIGNATION	LOOSE
FLANGE OUTSIDE DIAMETER	0.4400 INCHES NOMINAL IN
SURFACE FINISH	GROUND
SHIELD QUANTITY	2
STYLE DESIGNATOR	NON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH	0.1562 INCHES NOMINAL IN
BORE SHAPE	STRAIGHT

SUBSTITUTES & CROSS-REFERENCES 3

SR2FCHH3Reference document

Same NSN cross-reference

Reference document — Secondary reference

S312-8Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

SSRF-2ZZA3Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy SFR23PPK18-168?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is SFR23PPK18-168?

SFR23PPK18-168 is a BEARING,BALL,ANNULAR.

What parts can replace SFR23PPK18-168?

There are 3 known substitutes for SFR23PPK18-168: SR2FCHH3, S312-8, SSRF-2ZZA3. Substitute compatibility should be verified for your specific system.

What is the NSN for SFR23PPK18-168?

SFR23PPK18-168 is cataloged in the U.S. Government catalog under NSN 3110-01-191-3227. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

SFR23PPK18-168 — BEARING,BALL,ANNULAR

Request a Quote — SFR23PPK18-168