PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SFR2-5SSTA5C
SFR2-5SSTA5C ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440A OUTER RACE A, bore_shape: STRAIGHT, flange_width: 0.0310 INCHES NOMINAL IN, bore_diameter: 0.1250 INCHES NOMINAL IN, overall_width: 0.1406 INCHES NOMINAL IN, load_direction: RADIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-075-6195, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SFR2-5SSTA5C
NSN: 3110-01-075-6195
FSC: 3110
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 440A OUTER RACE A
bore_shapeSTRAIGHT
flange_width0.0310 INCHES NOMINAL IN
bore_diameter0.1250 INCHES NOMINAL IN
overall_width0.1406 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
calibration_designatorC
NSN3110-01-075-6195
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SFR2-5SSTA5C · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
•
LUBRICATION MATERIAL: GREASE
•
RETAINER FABRICATION METHOD: MACHINED
•
FLANGE WIDTH: 0.0310 INCHES NOMINAL IN
•
SHIELD QUANTITY: 2
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
OUTER RING OUTSIDE DIAMETER: 0.2500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.5
LUBRICATION MATERIALGREASE
RETAINER FABRICATION METHODMACHINED
FLANGE WIDTH0.0310 INCHES NOMINAL IN
SHIELD QUANTITY2
INTERNAL FIT-UP DESIGNATIONSTANDARD
OUTER RING OUTSIDE DIAMETER0.2500 INCHES NOMINAL IN
INTERNAL CLEARANCE0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
FLANGE OUTSIDE DIAMETER0.3590 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
SS3FK3Interchangeable
interchangeable cross-reference
interchangeable
SS3FInterchangeable
interchangeable cross-reference
interchangeable
941131-154Interchangeable
interchangeable cross-reference
interchangeable
77NM082C4F5UInterchangeable
interchangeable cross-reference
interchangeable
9072532Interchangeable
interchangeable cross-reference
interchangeable
SS518FCHHP48L011Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SFR2-5SSTA5C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SFR2-5SSTA5C?
SFR2-5SSTA5C is a BEARING,BALL,ANNULAR.
What parts can replace SFR2-5SSTA5C?
There are 30 known substitutes for SFR2-5SSTA5C: SS3FK3, SS3F, 941131-154 and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SFR2-5SSTA5C?
SFR2-5SSTA5C is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-075-6195. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SFR2-5SSTA5C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026