PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SFR188PPEEK25/7
SFR188PPEEK25/7 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The SFR188PPEEK25/7 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-625-9243, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SFR188PPEEK25/7
NSN: 3110-00-625-9243
FSC: 3110
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
Part NumberSFR188PPEEK25/7
NSN3110-00-625-9243
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SFR188PPEEK25/7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING OUTSIDE DIAMETER: 0.5000 INCHES NOMINAL IN
•
FLANGE WIDTH: 0.0230 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
RETAINER FABRICATION METHOD: PRESSED
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTER RING OUTSIDE DIAMETER0.5000 INCHES NOMINAL IN
FLANGE WIDTH0.0230 INCHES NOMINAL IN
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL CORROSION RESISTING OVERALL
RETAINER FABRICATION METHODPRESSED
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.7
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
BORE DIAMETER0.2500 INCHES NOMINAL IN
OUTER RING WIDTH0.1250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
S814FRHH3E-5P24L02Interchangeable
interchangeable cross-reference
interchangeable
S814FCHHEInterchangeable
interchangeable cross-reference
interchangeable
1040-132-2Interchangeable
interchangeable cross-reference
interchangeable
MIL-B-81793Interchangeable
Same NIIN cross-reference
interchangeable
S814FCHHEP28L02Interchangeable
Same NIIN cross-reference
interchangeable
412574-12Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SFR188PPEEK25/7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SFR188PPEEK25/7?
SFR188PPEEK25/7 is a SFR188PPEEK25/7.
What parts can replace SFR188PPEEK25/7?
There are 13 known substitutes for SFR188PPEEK25/7: S814FRHH3E-5P24L02, S814FCHHE, 1040-132-2 and 10 more. Substitute compatibility should be verified for your specific system.
Is SFR188PPEEK25/7 still available?
SFR188PPEEK25/7 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SFR188PPEEK25/7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026