PartsTable
Technical Data Sheet
Download PDF

SFR144PPEEK13-8 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SFR144PPEEK13-8: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, flange_width: 0.0310 INCHES NOMINAL IN, bore_diameter: 0.1250 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-729-5231, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SFR144PPEEK13-8
NSN: 3110-00-729-5231
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
flange_width0.0310 INCHES NOMINAL IN
bore_diameter0.1250 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
inner_ring_width0.1406 INCHES NOMINAL IN
outer_ring_width0.1094 INCHES NOMINAL IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
flange_outside_diameter0.2960 INCHES NOMINAL IN
NSN3110-00-729-5231
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SFR144PPEEK13-8 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.1094 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
FLANGE OUTSIDE DIAMETER: 0.2960 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.1094 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
FLANGE OUTSIDE DIAMETER0.2960 INCHES NOMINAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
9174829Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SFR144PPEEK13-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SFR144PPEEK13-8?
SFR144PPEEK13-8 is a BEARING,BALL,ANNULAR.
What parts can replace SFR144PPEEK13-8?
There is 1 known substitute for SFR144PPEEK13-8: 9174829. Substitute compatibility should be verified for your specific system.
What is the NSN for SFR144PPEEK13-8?
SFR144PPEEK13-8 is cataloged in the U.S. Government catalog under NSN 3110-00-729-5231. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SFR144PPEEK13-8