PartsTable
Technical Data Sheet
Download PDF

SFR144K25-20 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SFR144K25-20: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, flange_width: 0.0230 INCHES NOMINAL IN, bore_diameter: 0.1250 INCHES NOMINAL IN, overall_width: 0.0938 INCHES NOMINAL IN, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-289-8095, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SFR144K25-20
NSN: 3110-00-289-8095
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
flange_width0.0230 INCHES NOMINAL IN
bore_diameter0.1250 INCHES NOMINAL IN
overall_width0.0938 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
special_featuresSELECTED,CLASSIFIED AND TESTED BY ASSY MFR AT HIS PLANT
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
flange_outside_diameter0.2960 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
outer_ring_outside_diameter0.2500 INCHES NOMINAL IN
NSN3110-00-289-8095
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SFR144K25-20 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
FLANGE OUTSIDE DIAMETER: 0.2960 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONSTANDARD
FLANGE OUTSIDE DIAMETER0.2960 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.0938 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURESSELECTED,CLASSIFIED AND TESTED BY ASSY MFR AT HIS PLANT
FLANGE WIDTH0.0230 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy SFR144K25-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SFR144K25-20?
SFR144K25-20 is a BEARING,BALL,ANNULAR.
What is the NSN for SFR144K25-20?
SFR144K25-20 is cataloged in the U.S. Government catalog under NSN 3110-00-289-8095. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SFR144K25-20

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.