PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SFR1-4SS3C110-15
SFR1-4SS3C110-15 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OUTER RING, bore_shape: STRAIGHT, flange_width: 0.0310 INCHES NOMINAL IN, bore_diameter: 0.0781 INCHES NOMINAL IN, overall_width: 0.1406 INCHES NOMINAL IN, load_direction: RADIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-720-2348, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SFR1-4SS3C110-15
NSN: 3110-00-720-2348
FSC: 3110
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OUTER RING
bore_shapeSTRAIGHT
flange_width0.0310 INCHES NOMINAL IN
bore_diameter0.0781 INCHES NOMINAL IN
overall_width0.1406 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
lubrication_materialOIL
calibration_designatorC11
NSN3110-00-720-2348
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SFR1-4SS3C110-15 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL: OIL
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
•
OUTER RING OUTSIDE DIAMETER: 0.2500 INCHES NOMINAL IN
•
CALIBRATION DESIGNATOR: C11
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
LUBRICATION MATERIALOIL
LOAD DIRECTIONRADIAL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
OUTER RING OUTSIDE DIAMETER0.2500 INCHES NOMINAL IN
CALIBRATION DESIGNATORC11
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
BORE SHAPESTRAIGHT
SHIELD QUANTITY2
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
VSR2SSW3CF5G2Interchangeable
interchangeable cross-reference
interchangeable
SR2RHH5P24ZDL01Interchangeable
interchangeable cross-reference
interchangeable
405002-3Interchangeable
interchangeable cross-reference
interchangeable
SS3FK3Interchangeable
interchangeable cross-reference
interchangeable
SS3FInterchangeable
interchangeable cross-reference
interchangeable
941131-154Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SFR1-4SS3C110-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SFR1-4SS3C110-15?
SFR1-4SS3C110-15 is a BEARING,BALL,ANNULAR.
What parts can replace SFR1-4SS3C110-15?
There are 31 known substitutes for SFR1-4SS3C110-15: VSR2SSW3CF5G2, SR2RHH5P24ZDL01, 405002-3 and 28 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SFR1-4SS3C110-15?
SFR1-4SS3C110-15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-720-2348. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SFR1-4SS3C110-15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026