PartsTable
Technical Data Sheet
Download PDF

SFP4-7B1-501 — BEARING,ROLLER,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SFP4-7B1-501: BEARING,ROLLER,ROD END.

The BEARING,ROLLER,ROD END is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL, shank_style: INTERNALLY THREADED, thread_class: 3B, bore_diameter: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, alignment_type: SELF-ALIGNING, overall_length: 2.3600 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-806-2428, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SFP4-7B1-501
NSN: 3110-00-806-2428
NIINs: 008062428, 010222042
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 77896 — REXNORD INDUSTRIES, LLC DIV AEROSSPACE BEARING OPERATION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL
shank_styleINTERNALLY THREADED
thread_class3B
bore_diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
seal_quantity2
alignment_typeSELF-ALIGNING
overall_length2.3600 INCHES NOMINAL IN
shank_diameter0.6100 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN
shield_quantity2
inner_ring_width0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM IN
outer_ring_width0.3450 INCHES MINIMUM AND 0.3600 INCHES MAXIMUM IN
special_featuresSLOT ACROSS FACE OF SHANK END 0.0950 IN. W 0.0720 IN. DEEP IN
NSN3110-00-806-2428
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SFP4-7B1-501 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.6180 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN
•
SHANK THREAD LENGTH: 1.0938 INCHES MINIMUM AND 1.1562 INCHES MAXIMUM IN
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.3594 INCHES NOMINAL IN
•
SHIELD QUANTITY: 2
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
STYLE DESIGNATOR: SINGLE ROW, CONCAVE ROLLERS
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED-STD-66 FED STD SINGLE MATERIAL RESPONSE ROLLER
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.6180 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN
SHANK THREAD LENGTH1.0938 INCHES MINIMUM AND 1.1562 INCHES MAXIMUM IN
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.3594 INCHES NOMINAL IN
SHIELD QUANTITY2
CRITICALITY CODE JUSTIFICATIONFEAT
STYLE DESIGNATORSINGLE ROW, CONCAVE ROLLERS
MATERIAL DOCUMENT AND CLASSIFICATIONFED-STD-66 FED STD SINGLE MATERIAL RESPONSE ROLLER
MATERIAL DOCUMENT AND CLASSIFICATIONFED-STD-66 FED STD SINGLE MATERIAL RESPONSE INNER RING
MATERIAL DOCUMENT AND CLASSIFICATION204-001-064-1,97499 MFR REF SINGLE MATERIAL RESPONSE ROD END BODY
SUBSTITUTES & CROSS-REFERENCES 3
204-001-064-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
YS112ABReference document
Same NSN cross-reference
Reference document — Secondary reference
204-001-064-001Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SFP4-7B1-501?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SFP4-7B1-501?
SFP4-7B1-501 is a BEARING,ROLLER,ROD END.
What parts can replace SFP4-7B1-501?
There are 3 known substitutes for SFP4-7B1-501: 204-001-064-1, YS112AB, 204-001-064-001. Substitute compatibility should be verified for your specific system.
What is the NSN for SFP4-7B1-501?
SFP4-7B1-501 is cataloged in the U.S. Government catalog under NSN 3110-00-806-2428. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SFP4-7B1-501