PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SFC3
SFC3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 1.0000 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, largest_bore_diameter: 3.0625 INCHES NOMINAL IN, bore_smallest_diameter: 3.0000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-8575, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SFC3
NSN: 3110-00-100-8575
FSC: 3110
CAGE: 36384 — FMC CORP LINK-BELT DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width1.0000 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
largest_bore_diameter3.0625 INCHES NOMINAL IN
bore_smallest_diameter3.0000 INCHES NOMINAL IN
overall_outside_diameter4.5937 INCHES NOMINAL IN
standard_tolerance_designationABEC NO.1
thrust_directional_capability_designationSINGLE
NSN3110-00-100-8575
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SFC3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 4.5937 INCHES NOMINAL IN
•
BORE SMALLEST DIAMETER: 3.0000 INCHES NOMINAL IN
•
LARGEST BORE DIAMETER: 3.0625 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER4.5937 INCHES NOMINAL IN
OVERALL WIDTH1.0000 INCHES NOMINAL IN
BORE SMALLEST DIAMETER3.0000 INCHES NOMINAL IN
LARGEST BORE DIAMETER3.0625 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
MATERIALSTEEL OVERALL
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
E41Interchangeable
interchangeable cross-reference
interchangeable
E41-5-32Interchangeable
interchangeable cross-reference
interchangeable
102341Interchangeable
interchangeable cross-reference
interchangeable
SCD33384Interchangeable
interchangeable cross-reference
interchangeable
1101Interchangeable
interchangeable cross-reference
interchangeable
25421Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SFC3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SFC3?
SFC3 is a BEARING,BALL,THRUST.
What parts can replace SFC3?
There are 23 known substitutes for SFC3: E41, E41-5-32, 102341 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SFC3?
SFC3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-8575. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SFC3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026