PartsTable
Technical Data Sheet
Download PDF

SF862 — PACKING WITH RETAINER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SF862: PACKING WITH RETAINER.

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q PACKING, construction: ONE-PIECE, outside_diameter: 0.771 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN, retainer_thickness: 0.027 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN, packing_inside_diameter: 0.569 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN, packing_ring_cross-sectional_diameter: 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-454-1285, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SF862
NSN: 5330-00-454-1285
FSC: 5330 — Packing and Gasket Materials
CAGE: 09036 — SONFARREL INC. (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q PACKING
constructionONE-PIECE
outside_diameter0.771 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
retainer_thickness0.027 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
packing_inside_diameter0.569 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
packing_ring_cross-sectional_diameter0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
NSN5330-00-454-1285
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SF862 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PACKING INSIDE DIAMETER: 0.569 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.771 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
•
RETAINER THICKNESS: 0.027 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q PACKING
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS
PACKING INSIDE DIAMETER0.569 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.771 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
PACKING RING CROSS-SECTIONAL DIAMETER0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
RETAINER THICKNESS0.027 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q PACKING
CONSTRUCTIONONE-PIECE
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SF862?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SF862?
SF862 is a PACKING WITH RETAINER.
What is the NSN for SF862?
SF862 is cataloged in the U.S. Government catalog under NSN 5330-00-454-1285. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SF862