PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SE25
SE25 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The INVERTER,POWER,STATIC is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY BARREL, input_phase: THREE SINGLE OPERATING POWER RQMT, barrel_style: STRAIGHT ROUND TYPE, flange_style: FLANGE, barrel_height: 0.156 INCHES NOMINAL IN, overall_width: 6.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-485-0266, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SE25
NSN: 5325-00-485-0266
FSC: 5325
CAGE: 07707 — POP FASTENERS A BLACK AND DECKER CO (USA)
SPECIFICATIONS
materialCOPPER ALLOY BARREL
input_phaseTHREE SINGLE OPERATING POWER RQMT
barrel_styleSTRAIGHT ROUND TYPE
flange_styleFLANGE
barrel_height0.156 INCHES NOMINAL IN
overall_width6.000 INCHES NOMINAL IN
overall_length9.250 INCHES NOMINAL IN
special_featuresUNIT IS INTERCHANGEABLE DIMENSIONALLY WITH A 250VA UNIT CONFORMING TO MS21983-3
surface_treatmentNICKEL OVERALL
input_current_rating10.7 DC AMPERES NOMINAL SINGLE OPERATING POWER RQMT
input_voltage_rating28.0 DC VOLTS NOMINAL SINGLE OPERATING POWER RQMT
output_current_rating250.0 AC VOLT-AMPERE NOMINAL SINGLE POWER OUTPUT
NSN5325-00-485-0266
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SE25 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE STYLE: FLANGE
•
FLANGE OUTSIDE DIAMETER: 0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
BARREL OUTSIDE DIAMETER: 0.054 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY 260 OVERALL
•
BARREL STYLE: STRAIGHT ROUND TYPE
•
SURFACE TREATMENT: NICKEL OVERALL
•
BARREL HEIGHT: 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FLANGE STYLEFLANGE
FLANGE OUTSIDE DIAMETER0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
BARREL OUTSIDE DIAMETER0.054 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY 260 OVERALL
BARREL STYLESTRAIGHT ROUND TYPE
SURFACE TREATMENTNICKEL OVERALL
BARREL HEIGHT0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
8597436-004Interchangeable
interchangeable cross-reference
interchangeable
SE25Interchangeable
interchangeable cross-reference
interchangeable
GS2-5Interchangeable
interchangeable cross-reference
interchangeable
14EIR49DPInterchangeable
interchangeable cross-reference
interchangeable
101865G67Interchangeable
interchangeable cross-reference
interchangeable
74011Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SE25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SE25?
SE25 is a INVERTER,POWER,STATIC.
What parts can replace SE25?
There are 10 known substitutes for SE25: 8597436-004, SE25, GS2-5 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SE25?
SE25 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-485-0266. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SE25

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026