The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include body_height: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, features_provided: HERMETICALLY SEALED AND MONOLITHIC AND W/ENABLE AND POSITIVE OUTPUTS, output_logic_form: DIODE-TRANSISTOR LOGIC, inclosure_material: GLASS AND METAL, storage_temp_range: -65.0 TO 150.0 CELSIUS DEGC, operating_temp_range: -5.0 TO 70.0 CELSIUS DEGC. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5962-00-420-6549, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| body_height | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| features_provided | HERMETICALLY SEALED AND MONOLITHIC AND W/ENABLE AND POSITIVE OUTPUTS |
| output_logic_form | DIODE-TRANSISTOR LOGIC |
| inclosure_material | GLASS AND METAL |
| storage_temp_range | -65.0 TO 150.0 CELSIUS DEGC |
| operating_temp_range | -5.0 TO 70.0 CELSIUS DEGC |
| body_outside_diameter | 0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN |
| input_circuit_pattern | 5 INPUT |
| inclosure_configuration | CAN |
| terminal_surface_treatment | SOLDER |
| terminal_type_and_quantity | 10 PIN |
| time_rating_per_chacteristic | 20.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 20.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT NS |
| NSN | 5962-00-420-6549 |
| TERMINAL TYPE AND QUANTITY | 10 PIN |
| INCLOSURE CONFIGURATION | CAN |
| STORAGE TEMP RANGE | -65.0 TO 150.0 CELSIUS DEGC |
| TERMINAL SURFACE TREATMENT | SOLDER |
| CASE OUTLINE SOURCE AND DESIGNATOR | T0-96 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| TEST DATA DOCUMENT | 18338-111500 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| BODY HEIGHT | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| INCLOSURE MATERIAL | GLASS AND METAL |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 5.5 VOLTS MAXIMUM POWER SOURCE |
| BODY OUTSIDE DIAMETER | 0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN |