PartsTable
Technical Data Sheet
Download PDF

SDS-4640125MX-50H437 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SDS-4640125MX-50H437: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, hole_diameter: UNABLE TO DECODE, outside_diameter: 46.375 INCHES NOMINAL IN, aperture_diameter: 40.375 INCHES NOMINAL IN, bolt_hole_quantity: 50, bolt_circle_diameter: 43.875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-731-9467, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SDS-4640125MX-50H437
NSN: 5330-01-731-9467
FSC: 5330 — Packing and Gasket Materials
CAGE: 3R262 — SAN DIEGO SEAL INC DBA SAN DIEGO SEAL INC (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
hole_diameterUNABLE TO DECODE
outside_diameter46.375 INCHES NOMINAL IN
aperture_diameter40.375 INCHES NOMINAL IN
bolt_hole_quantity50
bolt_circle_diameter43.875 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyGASKET, FLAT, GRAPHITE WITH 316SS FOIL INSERT
NSN5330-01-731-9467
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SDS-4640125MX-50H437 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 46.375 INCHES NOMINAL IN
•
APERTURE DIAMETER: 40.375 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 50
•
BOLT CIRCLE DIAMETER: 43.875 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
HOLE DIAMETER: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
OUTSIDE DIAMETER46.375 INCHES NOMINAL IN
APERTURE DIAMETER40.375 INCHES NOMINAL IN
BOLT HOLE QUANTITY50
BOLT CIRCLE DIAMETER43.875 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYGASKET, FLAT, GRAPHITE WITH 316SS FOIL INSERT
MATERIALUNABLE TO DECODE
HOLE DIAMETERUNABLE TO DECODE
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SDS-4640125MX-50H437?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SDS-4640125MX-50H437?
SDS-4640125MX-50H437 is a GASKET.
What is the NSN for SDS-4640125MX-50H437?
SDS-4640125MX-50H437 is cataloged in the U.S. Government catalog under NSN 5330-01-731-9467. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SDS-4640125MX-50H437