SDM222IR — CONTROL ASSEMBLY,PUSH-PULL

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

SDM222IR: CONTROL ASSEMBLY,PUSH-PULL.

The CONTROL ASSEMBLY,PUSH-PULL is a the manufacturer industrial component. Key specifications include tip_type: PHILLIPS CROSS, drive_shank_type: HEXAGON, special_features: ANTI-CAMOUT RIBS FOR INSTALLATION/REMOVAL, nondefinitive_spec/std_data: 2 TYPE AND 2 CLASS, specification/standard_data: 05047-ASME B107.600/B107.26 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD, shank_width_across_wrench_flats: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5120-01-428-8660, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

SDM222IR

NSN: 5120-01-428-8660
FSC: 5120 — Hand Tools, Nonedged, Nonpowered
CAGE: 55719 — IDSC HOLDINGS LLC DIV SNAP-ON INDUSTRIAL, A DIV. OF IDSC HOLDINGS , LLC (USA)

SPECIFICATIONS

tip_type	PHILLIPS CROSS
drive_shank_type	HEXAGON
special_features	ANTI-CAMOUT RIBS FOR INSTALLATION/REMOVAL
tip_size_designation	2
nondefinitive_spec/std_data	2 TYPE AND 2 CLASS
specification/standard_data	05047-ASME B107.600/B107.26 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
shank_width_across_wrench_flats	0.250 INCHES NOMINAL IN
NSN	5120-01-428-8660

COMPONENT DIAGRAM

KEY FEATURES

•

TIP SIZE DESIGNATION: 2

•

DRIVE SHANK TYPE: HEXAGON

•

SHANK WIDTH ACROSS WRENCH FLATS: 0.250 INCHES NOMINAL IN

•

TIP TYPE: PHILLIPS CROSS

•

SPECIFICATION/STANDARD DATA: 05047-ASME B107.600/B107.26 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

•

NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 2 CLASS

TECHNICAL CHARACTERISTICS

TIP SIZE DESIGNATION	2
DRIVE SHANK TYPE	HEXAGON
SHANK WIDTH ACROSS WRENCH FLATS	0.250 INCHES NOMINAL IN
TIP TYPE	PHILLIPS CROSS
SPECIFICATION/STANDARD DATA	05047-ASME B107.600/B107.26 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONDEFINITIVE SPEC/STD DATA	2 TYPE AND 2 CLASS
SPECIAL FEATURES	ANTI-CAMOUT RIBS FOR INSTALLATION/REMOVAL

OTHER ITEMS IN FSC 5120 — Hand Tools, Nonedged, Nonpowered

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5120-00-001-2642 5120-00-001-2644 5120-00-001-2650 5120-00-001-2651 5120-00-001-2652 5120-00-001-2653 5120-00-001-2654 5120-00-001-2655

SUBSTITUTES & CROSS-REFERENCES 7

5120PL1058737Reference document

Same NSN cross-reference

Reference document — Informative reference only

B107.26 TY2CL2Reference document

Same NSN cross-reference

Reference document — Secondary reference

10001271453Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

B107.26Reference document

Same NSN cross-reference

Reference document — Secondary reference

SDM222IRAReference document

Same NSN cross-reference

Reference document — Secondary reference

SDM222IRBSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy SDM222IR?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is SDM222IR?

SDM222IR is a CONTROL ASSEMBLY,PUSH-PULL.

What parts can replace SDM222IR?

There are 7 known substitutes for SDM222IR: 5120PL1058737, B107.26 TY2CL2, 10001271453 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for SDM222IR?

SDM222IR is cataloged in the U.S. Government catalog under NSN 5120-01-428-8660. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

SDM222IR — CONTROL ASSEMBLY,PUSH-PULL

Request a Quote — SDM222IR