PartsTable
Technical Data Sheet
SCW10 24X42X7 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include seal_width: 7.0 MILLIMETERS NOMINAL MM, housing_bore_diameter: 42.0 MILLIMETERS NOMINAL MM, end_item_identification: HJ292 WATERJET, accommodated_shaft_diameter: 25.0 MILLIMETERS NOMINAL MM, part_name_assigned_by_controlling_agency: OIL SEAL (GACO DPSM 25427) C/W SS SPRING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-525-7616, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SCW10 24X42X7
NSN: 5330-01-525-7616
FSC: 5330
CAGE: S0073 — NAK MAO SHUN
SPECIFICATIONS
seal_width7.0 MILLIMETERS NOMINAL MM
housing_bore_diameter42.0 MILLIMETERS NOMINAL MM
end_item_identificationHJ292 WATERJET
accommodated_shaft_diameter25.0 MILLIMETERS NOMINAL MM
part_name_assigned_by_controlling_agencyOIL SEAL (GACO DPSM 25427) C/W SS SPRING
NSN5330-01-525-7616
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SCW10 24X42X7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SEAL WIDTH: 7.0 MILLIMETERS NOMINAL MM
ACCOMMODATED SHAFT DIAMETER: 25.0 MILLIMETERS NOMINAL MM
HOUSING BORE DIAMETER: 42.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH7.0 MILLIMETERS NOMINAL MM
ACCOMMODATED SHAFT DIAMETER25.0 MILLIMETERS NOMINAL MM
HOUSING BORE DIAMETER42.0 MILLIMETERS NOMINAL MM
PART NAME ASSIGNED BY CONTROLLING AGENCYOIL SEAL (GACO DPSM 25427) C/W SS SPRING
END ITEM IDENTIFICATIONHJ292 WATERJET
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
34758Interchangeable
interchangeable cross-reference
interchangeable
61-362Interchangeable
interchangeable cross-reference
interchangeable
2810L20-015Interchangeable
interchangeable cross-reference
interchangeable
A50000-8Interchangeable
interchangeable cross-reference
interchangeable
35J817Interchangeable
interchangeable cross-reference
interchangeable
14803Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SCW10 24X42X7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SCW10 24X42X7?
SCW10 24X42X7 is a SEAL,PLAIN.
What parts can replace SCW10 24X42X7?
There are 13 known substitutes for SCW10 24X42X7: 34758, 61-362, 2810L20-015 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SCW10 24X42X7?
SCW10 24X42X7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-525-7616. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SCW10 24X42X7