PartsTable
Technical Data Sheet
Download PDF

SCP229401C11 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SCP229401C11: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.125 INCHES NOMINAL ALL HOLES IN, overall_width: 1.562 INCHES NOMINAL IN, overall_length: 1.562 INCHES NOMINAL IN, special_features: MATERIAL IS CONDUCTIVE, style_designator: NON-CIRCULAR, aperture_diameter: 1.437 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-693-0473, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SCP229401C11
NSN: 5330-01-693-0473
FSC: 5330 — Packing and Gasket Materials
CAGE: 2B618 — SPACECRAFT COMPONENTS CORP (USA)
SPECIFICATIONS
hole_diameter0.125 INCHES NOMINAL ALL HOLES IN
overall_width1.562 INCHES NOMINAL IN
overall_length1.562 INCHES NOMINAL IN
special_featuresMATERIAL IS CONDUCTIVE
style_designatorNON-CIRCULAR
aperture_diameter1.437 INCHES NOMINAL IN
bolt_hole_quantity4
outside_corner_radius0.135 INCHES NOMINAL IN
cross-sectional_thickness0.020 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
center_to_center_distance_between_bolt_holes_along_width1.250 INCHES NOMINAL ALL HOLES IN
center_to_center_distance_between_bolt_holes_along_length1.250 INCHES NOMINAL ALL HOLES IN
NSN5330-01-693-0473
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SCP229401C11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.020 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE DIAMETER: 1.437 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.250 INCHES NOMINAL ALL HOLES IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.020 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH1.562 INCHES NOMINAL IN
OVERALL WIDTH1.562 INCHES NOMINAL IN
APERTURE DIAMETER1.437 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.250 INCHES NOMINAL ALL HOLES IN
SPECIAL FEATURESMATERIAL IS CONDUCTIVE
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.250 INCHES NOMINAL ALL HOLES IN
OUTSIDE CORNER RADIUS0.135 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SCP229401C11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SCP229401C11?
SCP229401C11 is a GASKET.
What is the NSN for SCP229401C11?
SCP229401C11 is cataloged in the U.S. Government catalog under NSN 5330-01-693-0473. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SCP229401C11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.