PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SCE-2012
SCE-2012 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 1.2500 INCHES NOMINAL IN, overall_width: 0.7500 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL, overall_outside_diameter: 1.5000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-155-9862, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SCE-2012
NSN: 3110-01-155-9862
FSC: 3110
CAGE: 27737 — INA BEARING CO INC (USA)
SPECIFICATIONS
bore_diameter1.2500 INCHES NOMINAL IN
overall_width0.7500 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
overall_outside_diameter1.5000 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-01-155-9862
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SCE-2012 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 1.2500 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 1.5000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
RETAINER FABRICATION METHOD: PRESSED
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
SURFACE FINISHGROUND
OVERALL WIDTH0.7500 INCHES NOMINAL IN
BORE DIAMETER1.2500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.5000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
RETAINER FABRICATION METHODPRESSED
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
13969Interchangeable
interchangeable cross-reference
interchangeable
SF50031Interchangeable
interchangeable cross-reference
interchangeable
22A-BInterchangeable
interchangeable cross-reference
interchangeable
SKA5390Interchangeable
interchangeable cross-reference
interchangeable
5740127Interchangeable
Same NIIN cross-reference
interchangeable
J-2012Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SCE-2012?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SCE-2012?
SCE-2012 is a BEARING,ROLLER,NEEDLE.
What parts can replace SCE-2012?
There are 6 known substitutes for SCE-2012: 13969, SF50031, 22A-B and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SCE-2012?
SCE-2012 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-155-9862. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SCE-2012

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026