PartsTable
Technical Data Sheet
Download PDF

SCD20655-11 — NUT,PLAIN,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SCD20655-11: NUT,PLAIN,PLATE.

The NUT,PLAIN,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OVERALL, nut_style: PLATE, nut_height: 0.266 INCHES NOMINAL IN, nut_length: 0.735 INCHES NOMINAL IN, plate_width: 0.485 INCHES NOMINAL IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-514-8924, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SCD20655-11
NSN: 5310-00-514-8924
FSC: 5310 — Nuts and Washers
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OVERALL
nut_stylePLATE
nut_height0.266 INCHES NOMINAL IN
nut_length0.735 INCHES NOMINAL IN
plate_width0.485 INCHES NOMINAL IN
thread_class3B
thread_seriesUNF
plate_thickness0.038 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.190 INCHES IN
gripping_prong_length0.063 INCHES NOMINAL IN
NSN5310-00-514-8924
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SCD20655-11 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.038 INCHES NOMINAL IN
•
NUT LENGTH: 0.735 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
PLATE WIDTH: 0.485 INCHES NOMINAL IN
•
GRIPPING PRONG LENGTH: 0.063 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
GRIPPING PRONG QUANTITY: 2
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.038 INCHES NOMINAL IN
NUT LENGTH0.735 INCHES NOMINAL IN
THREAD SERIESUNF
PLATE WIDTH0.485 INCHES NOMINAL IN
GRIPPING PRONG LENGTH0.063 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
GRIPPING PRONG QUANTITY2
NOMINAL THREAD SIZE0.190 INCHES IN
NUT HEIGHT0.266 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
58035Reference document
Same NSN cross-reference
Reference document — Secondary reference
SS58035Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SCD20655-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SCD20655-11?
SCD20655-11 is a NUT,PLAIN,PLATE.
What parts can replace SCD20655-11?
There are 2 known substitutes for SCD20655-11: 58035, SS58035. Substitute compatibility should be verified for your specific system.
What is the NSN for SCD20655-11?
SCD20655-11 is cataloged in the U.S. Government catalog under NSN 5310-00-514-8924. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SCD20655-11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.