PartsTable
Technical Data Sheet
Download PDF

SCD20650-25SS — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SCD20650-25SS: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include height: 0.422 INCHES NOMINAL IN, material: UNABLE TO DECODE, overall_width: 1.000 INCHES NOMINAL IN, overall_length: 1.031 INCHES NOMINAL IN, special_features: SPECIFIC MATL IS 304 SS W/SERMGUARD 1282 FINISH, style_designator: SURFACE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-595-5467, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SCD20650-25SS
NSN: 5340-01-595-5467
FSC: 5340 — Hardware, Commercial
CAGE: 1RRL5 — NIELSEN HARDWARE CORPORATION (USA)
SPECIFICATIONS
height0.422 INCHES NOMINAL IN
materialUNABLE TO DECODE
overall_width1.000 INCHES NOMINAL IN
overall_length1.031 INCHES NOMINAL IN
special_featuresSPECIFIC MATL IS 304 SS W/SERMGUARD 1282 FINISH
style_designatorSURFACE
mounting_facilityUNTHREADED HOLE(S)
end_item_identificationLIGHT FIXTURE,HI-BAY
part_name_assigned_by_controlling_agencyDRAW PULL STRIKE
NSN5340-01-595-5467
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SCD20650-25SS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SURFACE
•
HEIGHT: 0.422 INCHES NOMINAL IN
•
MOUNTING FACILITY: UNTHREADED HOLE(S)
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSURFACE
OVERALL LENGTH1.031 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
HEIGHT0.422 INCHES NOMINAL IN
MOUNTING FACILITYUNTHREADED HOLE(S)
SPECIAL FEATURESSPECIFIC MATL IS 304 SS W/SERMGUARD 1282 FINISH
PART NAME ASSIGNED BY CONTROLLING AGENCYDRAW PULL STRIKE
END ITEM IDENTIFICATIONLIGHT FIXTURE,HI-BAY
MATERIALUNABLE TO DECODE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
600A-3/T5-NV4-LPD REV-ITEM 45Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
P-583-A-SSSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SCD20650-25SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SCD20650-25SS?
SCD20650-25SS is a STRIKE,CATCH.
What parts can replace SCD20650-25SS?
There are 2 known substitutes for SCD20650-25SS: 600A-3/T5-NV4-LPD REV-ITEM 45, P-583-A-SS. Substitute compatibility should be verified for your specific system.
What is the NSN for SCD20650-25SS?
SCD20650-25SS is cataloged in the U.S. Government catalog under NSN 5340-01-595-5467. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SCD20650-25SS