PartsTable
Technical Data Sheet
Download PDF

SCD124-6 — WASHER,SADDLE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

SCD124-6: WASHER,SADDLE.

The WASHER,SADDLE is a the manufacturer industrial component. Key specifications include radius: 0.093 INCHES NOMINAL IN, material: STEEL COMP 1011 OVERALL, point_style: DOG, point_length: 0.094 INCHES NOMINAL IN, thread_class: 2A A, hole_diameter: 0.140 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-404-2675, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SCD124-6
NSN: 5305-00-404-2675
NIINs: 004042675, 004237880, 016990515
FSC: 5305 — Screws
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
radius0.093 INCHES NOMINAL IN
materialSTEEL COMP 1011 OVERALL
point_styleDOG
point_length0.094 INCHES NOMINAL IN
thread_class2A A
hole_diameter0.140 INCHES NOMINAL IN
overall_width0.390 INCHES NOMINAL IN
thread_length0.844 INCHES MINIMUM IN
overall_height0.098 INCHES NOMINAL IN
overall_length0.406 INCHES NOMINAL IN
point_diameter0.094 INCHES NOMINAL IN
fastener_length0.938 INCHES NOMINAL IN
NSN5305-00-404-2675
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SCD124-6 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
POINT DIAMETER: 0.094 INCHES NOMINAL IN
•
POINT LENGTH: 0.094 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.938 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC ALL TREATMENT RESPONSES OVERALL
•
THREAD LENGTH: 0.844 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: DOG
TECHNICAL CHARACTERISTICS
POINT DIAMETER0.094 INCHES NOMINAL IN
POINT LENGTH0.094 INCHES NOMINAL IN
FASTENER LENGTH0.938 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD LENGTH0.844 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD DIRECTIONRIGHT-HAND
POINT STYLEDOG
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SUBSTITUTES & CROSS-REFERENCES 1
SCD1246ITEM17Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy SCD124-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SCD124-6?
SCD124-6 is a WASHER,SADDLE.
What parts can replace SCD124-6?
There is 1 known substitute for SCD124-6: SCD1246ITEM17. Substitute compatibility should be verified for your specific system.
What is the NSN for SCD124-6?
SCD124-6 is cataloged in the U.S. Government catalog under NSN 5305-00-404-2675. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SCD124-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.