PartsTable
Technical Data Sheet
Download PDF

SCD101-3 — NUT,SELF-LOCKING,CAP

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SCD101-3: NUT,SELF-LOCKING,CAP.

The NUT,SELF-LOCKING,CAP is a the manufacturer industrial component. Key specifications include end_item_identification: U-2. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-816-8681, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SCD101-3
NSN: 5310-00-816-8681
NIINs: 008168681, 016990960
FSC: 5310 — Nuts and Washers
CAGE: 99449 — H KOCH & SONS CO (USA)
SPECIFICATIONS
end_item_identificationU-2
NSN5310-00-816-8681
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SCD101-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.334 INCHES MINIMUM AND 0.346 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE NUT
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD 1ST MATERIAL RESPONSE NUT
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.334 INCHES MINIMUM AND 0.346 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE NUT
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD 1ST MATERIAL RESPONSE NUT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
NUT HEIGHT0.293 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM NUT
SUBSTITUTES & CROSS-REFERENCES 6
P31006Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1JA4996H11Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
F22NKTM832Reference document
Same NSN cross-reference
Reference document — Secondary reference
11241856-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
F22NKTM82Reference document
Same NSN cross-reference
Reference document — Secondary reference
11241856Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy SCD101-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SCD101-3?
SCD101-3 is a NUT,SELF-LOCKING,CAP.
What parts can replace SCD101-3?
There are 6 known substitutes for SCD101-3: P31006, 1JA4996H11, F22NKTM832 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SCD101-3?
SCD101-3 is cataloged in the U.S. Government catalog under NSN 5310-00-816-8681. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SCD101-3