PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SCBB3314SS
SCBB3314SS ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, design_type: LOOP ENGAGING, hole_diameter: 0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN, overall_width: 1.120 INCHES NOMINAL IN, overall_height: 0.410 INCHES NOMINAL IN, operation_method: LEVER. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-069-0711, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SCBB3314SS
NSN: 5340-01-069-0711
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
design_typeLOOP ENGAGING
hole_diameter0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
hole_quantity4
overall_width1.120 INCHES NOMINAL IN
overall_height0.410 INCHES NOMINAL IN
operation_methodLEVER
style_designatorLEVER
surface_treatmentPASSIVATE OVERALL
engaging_surface_width0.625 INCHES NOMINAL IN
engaging_surface_thickness0.062 INCHES NOMINAL IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-069-0711
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SCBB3314SS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: LEVER
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 302 OVERALL
•
HOLE DIAMETER: 0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
•
OPERATION METHOD: LEVER
•
ENGAGING SURFACE WIDTH: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORLEVER
SURFACE TREATMENTPASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 302 OVERALL
HOLE DIAMETER0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
OPERATION METHODLEVER
ENGAGING SURFACE WIDTH0.625 INCHES NOMINAL IN
OVERALL HEIGHT0.410 INCHES NOMINAL IN
HOLE QUANTITY4
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
210-3107Interchangeable
interchangeable cross-reference
interchangeable
27254Interchangeable
interchangeable cross-reference
interchangeable
450-2045Interchangeable
interchangeable cross-reference
interchangeable
C14422Interchangeable
interchangeable cross-reference
interchangeable
TC-1-1/2Interchangeable
interchangeable cross-reference
interchangeable
6403440Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SCBB3314SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SCBB3314SS?
SCBB3314SS is a CATCH,CLAMPING.
What parts can replace SCBB3314SS?
There are 13 known substitutes for SCBB3314SS: 210-3107, 27254, 450-2045 and 10 more. Substitute compatibility should be verified for your specific system.
Is SCBB3314SS still available?
SCBB3314SS is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SCBB3314SS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026