PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SCB70086
SCB70086 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN, diameter: 0.1225 INCHES MINIMUM AND 0.1240 INCHES MAXIMUM IN, material: STEEL COMP 303 OVERALL, head_style: FLAT, chamfer_length: 0.010 INCHES NOMINAL IN, surface_finish: 32.0 MICROINCHES LARGE SHANK. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-664-3800, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SCB70086
NSN: 5315-00-664-3800
FSC: 5315
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
height0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
diameter0.1225 INCHES MINIMUM AND 0.1240 INCHES MAXIMUM IN
materialSTEEL COMP 303 OVERALL
head_styleFLAT
chamfer_length0.010 INCHES NOMINAL IN
surface_finish32.0 MICROINCHES LARGE SHANK
style_designatorSTRAIGHT
pin_chamfer_angle35.0 DEGREES MINIMUM AND 55.0 DEGREES MAXIMUM
pin_head_diameter0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
under_head_length0.372 INCHES MINIMUM AND 0.382 INCHES MAXIMUM IN
first_hole_diameter0.052 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
NSN5315-00-664-3800
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SCB70086 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
HEAD STYLE: FLAT
•
DIAMETER: 0.1225 INCHES MINIMUM AND 0.1240 INCHES MAXIMUM IN
•
CHAMFER LENGTH: 0.010 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: STRAIGHT
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 303 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HOLE ARRANGEMENT STYLEONE END DRILLED
HEAD STYLEFLAT
DIAMETER0.1225 INCHES MINIMUM AND 0.1240 INCHES MAXIMUM IN
CHAMFER LENGTH0.010 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORSTRAIGHT
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 303 OVERALL
SURFACE FINISH32.0 MICROINCHES LARGE SHANK
HEIGHT0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
50588Interchangeable
interchangeable cross-reference
interchangeable
6226Interchangeable
Intel Xeon Gold 6226 12C 125W 2.7GHz
interchangeable
GGG-G-17Interchangeable
interchangeable cross-reference
interchangeable
50225Interchangeable
interchangeable cross-reference
interchangeable
LP-E-31401-07Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SCB70086?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SCB70086?
SCB70086 is a PIN,STRAIGHT,HEADED.
What parts can replace SCB70086?
There are 5 known substitutes for SCB70086: 50588, 6226, GGG-G-17 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SCB70086?
SCB70086 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-664-3800. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SCB70086

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026