PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SCB70085
SCB70085 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING is a the manufacturer industrial component. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: ALUMINUM ALLOY 2024, overall_width: 2.000 INCHES NOMINAL IN, heat_treatment: T-3511 SOLUTION HEAT TREATED, overall_height: 1.000 INCHES NOMINAL IN, first_tip_style: SQUARE W/ INNER AND OUTER CORNER RADII. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-356-3367, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SCB70085
NSN: 3110-00-356-3367
FSC: 3110
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
length10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
materialALUMINUM ALLOY 2024
overall_width2.000 INCHES NOMINAL IN
heat_treatmentT-3511 SOLUTION HEAT TREATED
overall_height1.000 INCHES NOMINAL IN
first_tip_styleSQUARE W/ INNER AND OUTER CORNER RADII
basic_shape_styleANGLE
left_inside_angle90.0 DEGREES NOMINAL
fabrication_methodEXTRUDED
base_flange_thickness0.094 INCHES NOMINAL IN
first_tip_inner_radius0.031 INCHES NOMINAL IN
first_tip_outer_radius0.031 INCHES NOMINAL IN
NSN3110-00-356-3367
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SCB70085 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
ASTM B221Interchangeable
interchangeable cross-reference
interchangeable
S120Interchangeable
interchangeable cross-reference
interchangeable
60-1197Interchangeable
interchangeable cross-reference
interchangeable
50587-0Interchangeable
interchangeable cross-reference
interchangeable
50587Interchangeable
interchangeable cross-reference
interchangeable
LP-E-31401-06Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SCB70085?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SCB70085?
SCB70085 is a BEARING.
What parts can replace SCB70085?
There are 7 known substitutes for SCB70085: ASTM B221, S120, 60-1197 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SCB70085?
SCB70085 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-356-3367. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SCB70085

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026