PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SCB69850
SCB69850 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: COPPER ALLOY 360 BAND, overall_width: 0.313 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: NICKEL BAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-0682, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SCB69850
NSN: 5340-00-240-0682
FSC: 5340
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialCOPPER ALLOY 360 BAND
overall_width0.313 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentNICKEL BAND
material_thickness0.031 INCHES NOMINAL IN
loop_inside_diameter0.313 INCHES NOMINAL IN
material_document_and_classificationQQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.750 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.563 INCHES NOMINAL IN
NSN5340-00-240-0682
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SCB69850 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: NICKEL BAND
•
LOOP INSIDE DIAMETER: 0.313 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY 360 BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.563 INCHES NOMINAL IN
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTNICKEL BAND
LOOP INSIDE DIAMETER0.313 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
MATERIALCOPPER ALLOY 360 BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.563 INCHES NOMINAL IN
DIAMETER0.203 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.750 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
STYLE DESIGNATORSINGLE LOOP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
PH16Interchangeable
interchangeable cross-reference
interchangeable
CW84MPInterchangeable
interchangeable cross-reference
interchangeable
B233Interchangeable
interchangeable cross-reference
interchangeable
6400-0520-6001Interchangeable
interchangeable cross-reference
interchangeable
5-1084Interchangeable
interchangeable cross-reference
interchangeable
161109Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SCB69850?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SCB69850?
SCB69850 is a CLAMP,LOOP.
What parts can replace SCB69850?
There are 7 known substitutes for SCB69850: PH16, CW84MP, B233 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SCB69850?
SCB69850 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-0682. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SCB69850

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026