PartsTable / COMPONENT / SCB69383
SCB69383
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.196 INCHES NOMINAL IN, material: COPPER ALLOY BAND, overall_width: 0.313 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: NICKEL BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-0459, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
SCB69383
NSN: 5340-00-598-0459 FSC: 5340 CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
diameter 0.196 INCHES NOMINAL IN material COPPER ALLOY BAND overall_width 0.313 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED surface_treatment NICKEL BAND material_thickness 0.031 INCHES NOMINAL IN loop_inside_diameter 0.281 INCHES NOMINAL IN material_document_and_classification QQ-B-611 FED SPEC SINGLE MATERIAL RESPONSE BAND distance_from_loop_center_to_tongue_end 0.563 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.406 INCHES NOMINAL IN NSN 5340-00-598-0459
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: SCB69383
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SURFACE TREATMENT: NICKEL BAND
• MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.406 INCHES NOMINAL IN
• TONGUE HOLE TYPE: ROUND, UNTHREADED
• MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-611 FED SPEC SINGLE MATERIAL RESPONSE BAND
• MATERIAL: COPPER ALLOY BAND
• DIAMETER: 0.196 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT NICKEL BAND MATERIAL THICKNESS 0.031 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.406 INCHES NOMINAL IN TONGUE HOLE TYPE ROUND, UNTHREADED OVERALL WIDTH 0.313 INCHES NOMINAL IN MATERIAL DOCUMENT AND CLASSIFICATION QQ-B-611 FED SPEC SINGLE MATERIAL RESPONSE BAND MATERIAL COPPER ALLOY BAND DIAMETER 0.196 INCHES NOMINAL IN STYLE DESIGNATOR SINGLE LOOP LOOP INSIDE DIAMETER 0.281 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
51044 Upgraded Successor successor cross-reference
successor
50144 Upgraded Successor successor cross-reference
successor
122031 Interchangeable interchangeable cross-reference
interchangeable
8327962 Interchangeable interchangeable cross-reference
interchangeable
49744 Interchangeable interchangeable cross-reference
interchangeable
C08868 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy SCB69383?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SCB69383?
SCB69383 is a CLAMP,LOOP.
What parts can replace SCB69383?
There are 12 known substitutes for SCB69383: 51044, 50144, 122031 and 9 more. Substitute compatibility should be verified for your specific system.
Is SCB69383 still available?
SCB69383 is currently cancelled.
Request a Quote — SCB69383