PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SCA8460PTS
SCA8460PTS ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.406 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 0.875 INCHES NOMINAL IN, special_features: DESIGNED TO HOLD 3/4 IN. DIA MATERIAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-186-3928, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SCA8460PTS
NSN: 5340-00-186-3928
FSC: 5340
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
diameter0.406 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.875 INCHES NOMINAL IN
special_featuresDESIGNED TO HOLD 3/4 IN. DIA MATERIAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentZINC BAND
material_thickness0.0359 INCHES NOMINAL IN
loop_inside_diameter0.750 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.500 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.125 INCHES NOMINAL IN
NSN5340-00-186-3928
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SCA8460PTS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.406 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.406 INCHES NOMINAL IN
DIAMETER0.406 INCHES NOMINAL IN
SURFACE TREATMENTZINC BAND
OVERALL WIDTH0.875 INCHES NOMINAL IN
SURFACE TREATMENTZINC BAND
STYLE DESIGNATORSINGLE LOOP
DISTANCE FROM LOOP CENTER TO TONGUE END1.500 INCHES NOMINAL IN
MATERIALSTEEL BAND
SPECIAL FEATURESDESIGNED TO HOLD 3/4 IN. DIA MATERIAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
A46505REVGPC34Interchangeable
interchangeable cross-reference
interchangeable
84605Interchangeable
interchangeable cross-reference
interchangeable
A46505-34Interchangeable
interchangeable cross-reference
interchangeable
B18.3Interchangeable
interchangeable cross-reference
interchangeable
705Interchangeable
interchangeable cross-reference
interchangeable
601Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SCA8460PTS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SCA8460PTS?
SCA8460PTS is a CLAMP,LOOP.
What parts can replace SCA8460PTS?
There are 6 known substitutes for SCA8460PTS: A46505REVGPC34, 84605, A46505-34 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SCA8460PTS?
SCA8460PTS is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-186-3928. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SCA8460PTS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026